Giải pháp Sand Loop Màn 99

Step 1: Direct the initial sand stream and the yellow ball to the lower-middle section, bypassing the top-middle obstacle.

Draw a continuous, slightly downward-curved line starting from directly below the sand source on the left. Extend it rightwards and then curve downwards, ensuring it guides the sand *under* the first square-shaped obstacle and ends near the large open area in the bottom-middle.

The yellow ball and initial sand stream flow smoothly along the drawn line and accumulate in the open area below the first obstacle.

Step 2: Guide the accumulated sand and the remaining balls into the green target container.

Draw a second line starting from the accumulated sand. Create a ramp that curves slightly downwards and then sharply upwards to form an entrance funnel directly into the green target container located on the bottom right.

All sand and the two yellow balls successfully enter the green target container, filling it to the required level.

Q: How do I guide the sand past the first obstacle?

A: Draw a long, slightly curved line from the top-left sand source that goes underneath the square-shaped obstacle and directs the flow towards the lower-right area of the screen.

Q: What is the best way to get the balls into the container?

A: After guiding the sand past the first obstacle, draw a second line to create a ramp that directs the accumulated sand and the remaining balls into the green target container on the bottom right. Ensure the ramp funnels directly into the container's opening.