Giải pháp Sand Loop Màn 85

Step 1: Prepare the initial path from the start point.

Tap the top-left 'T' shaped segment once to rotate it vertically, connecting the starting point downwards.

The segment rotates, creating a downward path. (Observed 00:04)

Step 2: Guide the sand through the first upper-right turn.

After the sand starts flowing (around 00:10), tap the top-right L-shaped segment twice to orient it downwards, then tap the segment directly below it once to connect to the next horizontal path.

The sand flows around the top-right corner and proceeds leftward. (Observed 00:14 - 00:16)

Step 3: Redirect the sand downwards to the next layer.

Tap the segment the sand is approaching (left of the previous section) twice to align it vertically, allowing the sand to fall down.

Sand flows down towards the mid-left section of the maze. (Observed 00:19 - 00:21)

Step 4: Navigate the sand into the central-left section.

Tap the segment below the last one once to create a path into the L-shaped segment.

Sand flows into the L-shaped segment. (Observed 00:26)

Step 5: Guide the sand through the central-left turn and further down.

Tap the L-shaped segment (where the sand is) once to turn it downwards, then tap the segment below it once.

Sand flows down and to the right. (Observed 00:30 - 00:33)

Step 6: Traverse the bottom-left horizontal path.

Tap the horizontal segment below the previous one once to align it for the sand flow.

Sand flows into the next L-shaped segment. (Observed 00:36)

Step 7: Navigate through a rapid series of central rotations.

Tap the L-shaped segment (sand is in) once, then the segment to its right twice, then the next L-shaped segment once, then the segment below it twice to create a zigzag path.

Sand flows quickly through the complex central path. (Observed 00:40 - 00:48)

Step 8: Guide the sand to the final rightmost path.

Tap the horizontal segment the sand is approaching once, then the L-shaped segment below it once.

Sand flows to the far right. (Observed 00:51 - 00:55)

Step 9: Complete the level by guiding sand into the exit.

Tap the segment below the last one twice to align it directly with the exit point.

Sand flows into the exit, and 'Level Complete' appears. (Observed 00:57 - 01:05)

Q: How do I control the flow of sand in the Sand Loop level?

A: You control the sand flow by tapping on the individual path segments. Each tap rotates the segment 90 degrees clockwise, allowing you to create a continuous path for the sand from the start to the exit.

Q: What happens if the sand falls off the path or into a wrong section?

A: While not shown in this specific walkthrough, typically in such games, if the sand fails to reach the exit, the level will restart, or the sand will despawn, requiring you to attempt the path again.

Q: Is speed important when rotating segments?

A: Yes, especially in sections where the sand flows quickly or requires multiple consecutive turns, you need to anticipate the sand's movement and rotate segments swiftly to maintain an unbroken path.