Giải pháp Sand Loop Màn 117

Step 1: Create an initial downward slope for the left cup.

Start drawing a line from the sand dispenser, curving downwards and to the left, aiming to funnel sand into the opening of the first (left) cup.

The drawn line forms a clear, open channel for sand to enter the left cup.

Step 2: Construct an elevated path to guide sand from the first cup to the second cup.

From the lower edge of the left cup, continue drawing the line upwards in a semi-circular loop or ramp, then curve it downwards to direct sand into the right cup. Ensure the peak of the loop is high enough for sand to flow over the lip of the right cup.

The line creates a continuous, elevated pathway that connects the exit point of the first cup to the entry point of the second cup.

Step 3: Finalize the path within the second cup and complete the drawing.

Draw the remaining part of the line to ensure sand efficiently enters and collects in the right cup. Lift your finger to stop drawing.

Upon lifting the finger, sand flows successfully through the entire path, filling both cups, and the 'Perfect!' message appears.

Q: How do I make sure sand flows into both cups?

A: You need to draw a single continuous line that first directs sand into the first cup, and then from the first cup's output, creates an elevated path (like a loop or ramp) that guides the sand into the second cup.

Q: My sand isn't reaching the second cup, or it's spilling.

A: For the second cup, ensure your elevated path is high enough to allow the sand to flow over its rim. For spilling, make sure your drawn line has enough 'height' or curves smoothly to contain the sand as it flows.