Giải pháp Sand Loop Màn 105

Step 1: Identify the sand source and target truck.

Observe the initial level layout: sand flows from the top-left, and the truck is positioned at the bottom-right.

Understanding the entry and exit points for the sand.

Step 2: Create a path for the sand to flow into the truck.

Draw a continuous, slightly curved line directly from the area below the sand source, extending downwards and into the opening of the truck.

Sand begins flowing along the drawn line towards the truck.

Step 3: Ensure the truck fills completely without sand spillage.

Adjust the drawn line's curvature and width as needed to contain the sand flow and direct it accurately into the truck's bed, preventing it from overflowing the sides.

The truck's fill meter reaches 100%, and the 'Level Complete' screen appears.

Q: How do I make the sand go into the truck?

A: You need to draw a continuous path with your finger from the sand source at the top-left to the opening of the truck at the bottom-right.

Q: Why does my sand keep spilling out of the truck or the path?

A: Ensure your drawn line is wide enough to contain all the sand and that it's precisely aligned with the truck's opening so no sand flows over the edges. Avoid abrupt angles.

Q: What is the main objective of Level 1 in Sand Loop?

A: The objective is to fill the truck completely with sand by drawing a path for the sand to follow from its source.