Giải pháp Sand Loop Màn 116

Hướng dẫn đầy đủ và chiến lược cho Sand Loop Màn 116. Xem video hướng dẫn và học mẹo chuyên gia để vượt qua màn này.

Video hướng dẫn Màn 116

Hướng dẫn Sand Loop Màn 116
Nhấn để phát video

Xem video hướng dẫn này để học cách vượt qua Sand Loop Màn 116. Làm theo giải pháp từng bước.

Tổng quan Sand Loop Màn 116

Làm chủ Sand Loop Màn 116 với hướng dẫn đầy đủ. Màn trung bình này thường mất 3–5 min để hoàn thành. Tìm mẹo, video hướng dẫn và chiến lược cho màn giải đố này.

116
Màn
Trung bình
Độ khó
3–5 min
Thời gian TB

Chiến lược chi tiết màn chơi

A walkthrough for Sand Loop Level 1, demonstrating multiple attempts to guide sand into a bucket by drawing a line to pivot a movable block into place.

Thời gian hoàn thành ước tính
1 min
Số lần thử lại quan sát
9
Thiết bị
UNKNOWN
Phiên bản trò chơi
UNKNOWN

Thời điểm và hành động quan trọng

TimeCảnhHành độngLỗi phổ biếnĐộ tin cậy
00:00Level introductionDisplay of 'Level 1' title card and initial game setup.100%
00:05First attempt beginsPlayer draws a short horizontal line beneath the sand source.100%
00:09First attempt failsSand falls past the bucket without being redirected.Sand falls past bucket100%
00:33Attempt 6Player draws a line attempting to interact with the purple movable block to guide sand.90%
00:49Attempt 9Player draws a longer diagonal line aiming to push the purple block more effectively.90%
00:54Successful attempt beginsPlayer draws a precise diagonal line from the left wall, below the sand source, ending just above the purple block.100%
00:57Sand enters the bucketThe purple block, pushed by the sand and drawn line, pivots to channel sand into the green bucket.100%
01:00Level CompleteThe 'Level Complete' screen appears, indicating success.100%

Hướng dẫn từng bước

Step 1: Create an initial ramp to guide the falling sand towards the movable purple block.

Draw a single diagonal line starting from the left wall, below the sand source. Extend this line downwards and slightly to the right, ensuring it connects to the wall and ends just above the top-left edge of the bottom purple block.

The drawn line appears on screen, and the yellow sand particles begin sliding down its surface.

Step 2: Utilize the drawn line and sand's momentum to pivot the purple block, redirecting the sand into the green bucket.

Observe as the sand slides down the drawn line and impacts the purple block. The line acts as a lever, causing the purple block to swing to the right and pivot, creating a funnel or barrier that directs the sand's flow.

The purple block visibly moves and pivots, and sand starts to accumulate within the green target bucket.

Step 3: Fill the bucket with sufficient sand to complete the level.

No further action is required. Allow the remaining sand to flow into the bucket, maintaining the established path.

The 'Level Complete' message appears on the screen, indicating the level has been successfully cleared.

Lỗi phổ biến và cách sửa

Sand falls past the target bucket, usually due to inadequate redirection or the purple block not being correctly positioned.

Cách sửa: The drawn line must be precisely angled and placed. It needs to be steep enough to ensure sand flow, but also positioned to effectively engage and pivot the purple block into its redirecting position. Avoid drawing lines that are too short, too horizontal, or allow sand to bypass the block entirely.

Thời gian bằng chứng: 00:09

The purple block moves ineffectively (e.g., too little, too much, or in the wrong direction), causing the sand to miss the bucket.

Cách sửa: The line drawn must provide the correct leverage and angle for the purple block's movement. If the line is too shallow or too far from the block, it may not move sufficiently. Conversely, if it's too aggressive or poorly angled, it might push the block out of the way or create an unwanted gap. The successful strategy at 00:54 shows the line connecting to the wall and gently guiding the sand to pivot the block into the correct position.

Thời gian bằng chứng: 00:48

Câu hỏi nhanh

Q: How do I get the sand into the bucket in Sand Loop Level 1?

A: Draw a single diagonal line from the left wall, below the sand source, extending downwards and to the right. This line should guide the sand to push and pivot the purple block, which will then redirect the sand into the green bucket.

Q: My purple block isn't moving correctly or my sand isn't going into the bucket on Sand Loop Level 1. What's wrong?

A: The precision of your drawn line is key. Ensure it's connected to the left wall and positioned so that the falling sand effectively pushes the purple block to pivot it into the bucket's path. Avoid lines that are too short, too horizontal, or cause the block to move too far or not enough.

Chia sẻ hướng dẫn Sand Loop Màn 116

Thấy hướng dẫn Sand Loop Màn 116 hữu ích? Chia sẻ với bạn bè đang bị kẹt ở màn này!

FacebookTwitterWhatsAppReddit

Chia sẻ trải nghiệm của bạn

0/200 ký tự

Max 1MB

Max 5MB

Bình luận cộng đồng (0)

Chưa có bình luận. Hãy là người đầu tiên chia sẻ trải nghiệm!