Giải pháp Sand Loop Màn 184

Step 1: Create an initial path for the falling sand

Draw a sloped, slightly curved line starting from below the sand source, guiding the sand around the right side of the central rock obstacle.

Sand begins to flow smoothly down the drawn line towards the lower ground.

Step 2: Direct the sand into the truck

Draw a second, relatively flat line segment from the lower ground directly into the bed of the truck.

Sand starts to accumulate and fill the truck.

Step 3: Complete the level by filling the truck

Wait for all the required sand to flow into the truck. No further drawing is needed.

The truck appears full, and a 'Next' button or level completion screen is displayed.

Q: How do I ensure the sand flows smoothly around obstacles?

A: Draw lines that are sufficiently sloped and smooth, avoiding sharp angles or flat spots where sand can get stuck. Ensure the path is wide enough for the sand volume.

Q: What if the sand doesn't reach the truck?

A: Check if your drawn path is continuous and has a constant downward slope leading directly into the truck. Adjust angles and lengths to ensure proper flow.