Giải pháp Sand Loop Màn 95

Step 1: Direct the initial sand flow into the left-most basin.

Drag the single movable rectangular block from its initial central position to the far left side of the screen. This will create an opening for sand to flow from the top source into the basin below it.

Sand visibly begins to flow into the left basin (e.g., around 00:04 in the video).

Step 2: Redirect sand flow from the left basin to the truck.

Wait for a sufficient amount of sand to accumulate in the left basin. Once accumulated, drag the movable block from the far left to the far right side of the screen. This action will close the path to the left basin and open a new path directly from the basin's output to the truck.

Sand stops flowing into the left basin and begins flowing from the basin's outlet towards and into the truck (e.g., around 00:07 in the video).

Step 3: Fill the truck completely.

Allow the sand to continue flowing into the truck until it is full.

The truck is visibly full, indicated by the sand level reaching the top, and the 'LEVEL CLEAR' notification appearing on screen (e.g., around 00:11-00:13 in the video).

Q: How do I control the sand flow in this level?

A: You control the sand flow by dragging the single rectangular block. Move it to the far left to fill the first basin, then move it to the far right to direct sand from the basin to the truck.

Q: What is the correct timing to move the block from filling the basin to filling the truck?

A: Wait until the left basin is about half to two-thirds full of sand. This ensures there's enough sand to continuously flow into the truck without interruption once the block is moved. Moving too early or too late can lead to issues like incomplete fills or overflows.