Sand Loop 레벨 329 솔루션

Step 1: Create a main pathway for the sand from the source towards containers A and B.

Draw a long diagonal line from the sand source down and to the left, extending above containers A and B. Then draw a horizontal line connecting it to the left wall.

Sand flows along the drawn path and accumulates above containers A and B.

Step 2: Direct sand into container A first.

Draw a vertical line between containers A and B, extending downwards to create a partition. Then draw a small horizontal line or ensure the previous line guides sand primarily into A, effectively blocking flow to B temporarily.

Sand starts filling container A.

Step 3: Completely fill container A.

Maintain the sand flow directed into container A until it is full.

Container A turns green and displays 'FULL'.

Step 4: Direct sand into container B.

Once container A is full, remove or adjust the line that was blocking the path to B, allowing sand to flow into container B.

Sand starts filling container B.

Step 5: Completely fill container B.

Continue directing sand into container B until it is full.

Container B turns green and displays 'FULL'.

Step 6: Create a path to container C.

From the area where A and B were filled, draw a new line downwards and to the right, guiding the remaining sand towards the lower container C. Add a short vertical line to funnel sand into C.

Sand flows into container C.

Step 7: Completely fill container C and clear the level.

Continue directing sand into container C until it is full.

Container C turns green and displays 'FULL', followed by the 'LEVEL CLEAR!' message.

Q: What is the optimal order for filling the containers?

A: Based on the video, filling A then B, and finally C (the lowest container) works effectively. This sequential approach uses drawn lines to manage flow.

Q: How can I prevent sand from flowing into the wrong container?

A: Draw temporary lines or barriers to block unwanted paths. For example, draw a small line to block flow to B while filling A, and then remove it.