Sand Loop 레벨 327 솔루션

Step 1: Clear the initial path for sand near the source.

Draw a line through the top-left red block to make it disappear.

The red block is removed, creating an open path.

Step 2: Guide sand into container A.

Draw a diagonal line from the opening near the sand source downwards, leading directly into the entrance of container A.

Sand starts flowing into and filling container A.

Step 3: Guide sand from container A to container B.

Draw a horizontal line extending from the bottom exit of container A across to the entrance of container B.

Sand flows out of container A and into container B.

Step 4: Guide sand from container B to container C.

Draw a horizontal line extending from the bottom exit of container B across to the entrance of container C.

Sand flows out of container B and into container C.

Step 5: Fill all containers to complete the level.

Allow the sand to continue flowing until container C is filled to its required line.

The 'Level Complete' message appears on the screen.

Q: How do I remove the red blocks in Sand Loop?

A: Red blocks can be removed by drawing a line through them with your drawing tool.

Q: What if my sand gets stuck or doesn't flow correctly?

A: Adjust your drawn lines to create a smoother, continuous, and downward-sloping path for the sand to flow. Ensure there are no gaps or uphill sections.

Q: How can I ensure enough sand reaches all three containers?

A: Draw efficient, relatively narrow channels that direct sand precisely into each container, preventing spillage or diversion to unintended areas.