Sand Loop 레벨 311 솔루션

Step 1: Create a sand ramp across the initial gap for the block to slide onto.

Tap the sand dispenser to release sand, then draw a line from the dispenser towards the right, guiding the sand into the pit below the block.

The sand fills the pit, forming an incline that the block slides down onto.

Step 2: Move the block horizontally across the level using the sand.

Once the block is resting on the sand, continuously draw lines behind the block, pushing the sand and consequently the block to the right.

The block moves steadily to the right side of the screen, staying on top of the sand.

Step 3: Lift the block onto the final elevated platform leading to the goal.

When the block is positioned next to the final elevated platform, draw a line directly beneath the block, causing the sand to pile up and elevate the block.

The block is pushed upwards and lands securely on the small elevated platform.

Step 4: Guide the block into the goal basket.

From the elevated platform, draw a short line to the right of the block, pushing it into the waiting basket.

The block enters the basket, and 'LEVEL CLEAR' is displayed.

Q: How do I make the sand start flowing?

A: Tap the sand dispenser (the orange square) at the top of the screen.

Q: How do I guide the sand to create ramps and paths?

A: Draw lines on the screen with your finger. The sand will flow along these lines or pile up where you draw, allowing you to create inclines and push objects.

Q: My block isn't moving right, what should I do?

A: Ensure you are drawing lines behind the block to push the sand, and thus the block, in the desired direction. Maintain a continuous path of sand for the block to slide on.

Q: How can I lift the block to a higher platform?

A: Draw a line directly underneath the block to make the sand pile up, effectively lifting the block onto the elevated surface.