Sand Loop 레벨 334 솔루션

Step 1: Initiate sand flow and bypass the initial red obstacle on the right.

Draw a downward-sloping line from the sand dispenser's initial flow path, extending downwards and slightly to the right. This creates a channel that bypasses the upper-right red block.

Sand successfully flows along this line past the initial red block.

Step 2: Guide the sand past the remaining red obstacles into the target funnel.

From the end of the first line, draw a second line that curves sharply to the left, then gently to the right, forming a continuous channel. This channel should safely guide the sand around the central red block and into the funnel leading to the target zone.

All sand flows smoothly through the drawn channel and enters the target funnel without touching any red areas.

Step 3: Fill the target zone to complete the level.

Allow the sand to continue flowing from the dispenser through the established path until the target zone is completely filled. No further drawing is required.

The "LEVEL COMPLETE" message is displayed, indicating the level has been cleared.

Q: How do I avoid the red blocks in Sand Loop Level 20?

A: You must draw your lines to create a channel that guides the sand around the red blocks. Ensure the channel is wide enough for the sand and maintains a clear path.

Q: What's the best strategy for drawing lines in Sand Loop Level 20?

A: Aim for smooth, continuous, downward-sloping lines. Start by guiding sand past the first obstacle, then create a clear path around subsequent obstacles directly into the target funnel. Minimize unnecessary drawing to potentially conserve 'ink' if there's a limit.

Q: Why isn't my sand flowing into the target in Sand Loop Level 20?

A: Check if your drawn lines are connected, form a continuous channel, and have a consistent downward slope to allow gravity to guide the sand. Also, ensure no red obstacles are blocking the path or consuming sand.