Sand Loop Level 216 Solution

Step 1: Clear the initial path to the first pressure plate

Move right and push 3 sand blocks consecutively into the holes to form a continuous path.

The path is fully connected, allowing access to the pressure plate at the end.

Step 2: Activate the first conveyor belt

Move onto the pressure plate located at the end of the initial path.

The conveyor belt to the right of the pressure plate starts moving.

Step 3: Create a path to the second pressure plate

Push a sand block onto the activated conveyor belt, let it move right, then push it down into the hole to complete the path to the next pressure plate.

A new path is formed, providing access to the second pressure plate.

Step 4: Activate the second conveyor belt

Move onto the newly accessible second pressure plate.

Another section of the conveyor belt activates further to the right.

Step 5: Create a path to the red switch

Push a sand block right along the activated conveyor belt, then push it down into the hole to connect the path to the red switch.

A complete path leads directly to the red switch.

Step 6: Activate the red switch

Move to the red switch and push it.

The red switch is activated (visual cue might be a subtle change in the environment or a sound).

Step 7: Collect the purple key

Retrace your steps back past the first pressure plate, then push 4 sand blocks down into holes to create a long path leading to the lower-left area. Pick up the purple key located at the end of this path.

The purple key icon appears, indicating it has been collected.

Step 8: Activate the third conveyor belt

Move back to the starting area, then push a sand block left into a hole near the initial starting point. Step onto the pressure plate now accessible to the left.

A conveyor belt section to the left of the pressure plate starts moving.

Step 9: Create a path to the green switch

Push a sand block left onto the activated conveyor belt, then push it and a second block down into holes. Move across this newly formed path, then push another sand block right onto a conveyor belt, and finally push it down into a hole to complete the path to the green switch.

A direct path is established to the green switch.

Step 10: Activate the green switch

Move to the green switch and push it.

The green switch is activated.

Step 11: Open the purple door

Move back left and up towards the area where the red switch was. Continue upward and push 3 sand blocks into holes to clear a path to the purple door. The collected purple key will automatically open the door.

The purple door slides open, allowing passage.

Step 12: Create the final path to the exit portal

Pass through the purple door. Push 4 sand blocks into holes to extend the path. Move right and up, then push 4 more sand blocks into holes to complete the path directly to the exit portal.

A continuous path from the purple door to the exit portal is fully constructed.

Step 13: Exit the level

Move onto the glowing exit portal.

The character enters the portal and the level clear screen appears.

Q: How do I activate the conveyor belts in Sand Loop?

A: Conveyor belts are activated by stepping on specific pressure plates. Ensure you create paths to reach and step on all visible pressure plates.

Q: Where can I find the purple key in the Sand Loop level?

A: The purple key is found in the lower-left section of the map. You need to push a series of 4 sand blocks to create a long path to reach it after activating the initial conveyor belt system.

Q: What do the red and green switches do?

A: The red and green switches activate unseen mechanisms (likely opening gates or extending bridges) in other parts of the level, which are crucial for progressing to new areas and ultimately the exit.