Giải pháp Sand Loop Màn 74

Step 1: Block the first vertical gap on the top-right.

Drag the blue rectangular block located on the top-right side to the left, positioning it against the wall to completely block the immediate vertical drop.

The blue block is flush against the wall, preventing sand from falling directly down.

Step 2: Create a bridge for sand across the first horizontal gap.

Drag the yellow L-shaped block (initially on the far left, above the second L-block) to the right. Position it to connect the platform where sand will land with the next platform to its right.

The L-block forms a continuous surface from the landing point to the next section of the path.

Step 3: Start the sand flow.

Tap the blue triangular sand release mechanism at the top of the screen.

Sand begins to pour from the pipe.

Step 4: Guide sand from the first platform onto the yellow L-shaped block.

Slightly drag the blue rectangular block (from Step 1) to the left, creating a small opening for the sand to fall onto the positioned yellow L-shaped block.

Sand flows through the created gap and lands on the yellow L-block.

Step 5: Adjust the first yellow L-shaped block to guide sand to the next lower platform.

Drag the yellow L-shaped block (from Step 2) further to the left and slightly down to direct the sand onto the next lower platform.

Sand smoothly flows off the L-block and lands on the platform below.

Step 6: Position the second yellow L-shaped block to create a ramp.

Drag the second yellow L-shaped block (initially on the far left, below the sand release) to the right. Position it to form a ramp that receives sand from the current platform and guides it downwards.

The L-block is correctly aligned to catch sand and direct it further along the path.

Step 7: Block the final vertical gap before the container.

Drag the blue rectangular block (from Step 1 and 4) to the right, positioning it to block the final vertical gap just before the container, ensuring sand is directed horizontally.

The blue block creates a solid wall, preventing sand from falling prematurely.

Step 8: Guide sand into the container.

Make a final adjustment to the second yellow L-shaped block (from Step 6), positioning it precisely to funnel the flowing sand directly into the container.

Sand begins to pour continuously into the target container.

Step 9: Fill the container to clear the level.

Wait for the sand to completely fill the container.

The container fills up, and the 'Level Clear!' notification appears on screen.

Q: How do I start the sand flow in Sand Loop?

A: To start the sand flow, you need to tap the blue triangular mechanism, usually located near the sand source pipe.

Q: What is the purpose of the blue rectangular blocks?

A: Blue rectangular blocks are primarily used to block gaps or create walls to guide the sand's horizontal flow.

Q: What are the yellow L-shaped blocks for?

A: Yellow L-shaped blocks are used to create ramps, bridges, or funnels, guiding the sand's flow in specific directions, often over gaps or downwards.

Q: How do I know if I've placed a block correctly?

A: The correct placement is indicated by the sand flowing smoothly along the intended path. If sand spills or doesn't reach the target, the blocks need adjustment.