Sand Loop Level 302 Solution

Step 1: Direct initial sand flow to the top-right truck.

Draw a short, slightly curved line from the sand spout's immediate path directly into the opening of the top-right truck.

Sand begins to flow into the top-right truck (visible around 00:04).

Step 2: Create a path for sand to reach the lower-left truck.

Draw a path downwards and to the left, starting below the initial sand stream, guiding it under the central obstacle and into the lower-left truck.

Sand starts flowing down this new path towards the lower-left truck (visible around 00:07).

Step 3: Create a path for sand to reach the lower-right truck.

Draw a path downwards and to the right, from the main sand flow (near where the second path originated), guiding it under the central obstacle and into the lower-right truck.

Sand splits and flows into the lower-right truck, with all three trucks now receiving sand (visible around 00:11-00:12).

Step 4: Allow all trucks to fill completely.

Observe the sand filling the trucks. No further drawing is required.

The 'LEVEL COMPLETED' message appears once all trucks are filled (around 00:29).

Q: How can I ensure all three trucks receive enough sand?

A: The key is to create distinct, unobstructed paths for each truck from the main sand flow. Ensure the initial split point allows sand to flow into all paths you've drawn, and adjust path widths if one truck is filling significantly faster or slower than others.

Q: What's the best order to draw the paths?

A: While the order isn't strict, drawing the top-right path first to capture that immediate flow, then the lower-left, and finally the lower-right, as shown in the video, is an effective strategy to manage sand distribution from the start.