Sand Loop Level 322 Solution

Step 1: Guide sand from the dispenser onto the first static platform.

Draw a diagonal line downwards and to the right, starting from the sand dispenser's initial drop point (top-left block) and connecting to the upper-middle static platform.

Sand flows along the drawn line and lands on the first static platform.

Step 2: Move sand from the first static platform to the next lower-left platform.

Draw a line from the left edge of the first static platform, angling it down and to the left, to connect with the second lower-left static platform.

Sand flows off the first platform and lands onto the second, lower platform.

Step 3: Guide sand horizontally from the second platform to the right, preventing premature drops.

From the right edge of the second platform, draw a horizontal line extending to the right, creating a path over the empty space.

Sand flows along this newly drawn horizontal path instead of falling directly downwards.

Step 4: Drop sand into the final container.

From the right end of the horizontal line drawn in the previous step, draw a vertical line downwards, directing the sand into the target container.

Sand flows off the horizontal line and drops directly into the container.

Step 5: Completely fill the container.

Allow the remaining sand to pour into the container through the created path.

The container fills up, and 'Level Clear!' appears on the screen.

Q: How do I make the sand travel to the right after the second platform instead of falling down?

A: You need to draw a horizontal line extending to the right from the right edge of the second platform. This creates a bridge for the sand to travel across before you direct it downwards.

Q: What is the optimal angle for drawing the guiding lines?

A: While the video doesn't specify angles, generally a moderate downward slope is sufficient. Too shallow might slow sand, too steep might cause it to overshoot. Observe the flow in the video for reference.