Sand Loop Level 284 Solution

Step 1: Guide sand from the dispenser onto the first rotating gear.

Tap and drag to draw a line starting below the sand dispenser opening and extending downwards to land the sand onto the central part of the first large rotating gear.

Sand begins to flow along the drawn line and hits the first gear, causing it to rotate as sand accumulates.

Step 2: Transfer sand from the first rotating gear to the second rotating gear.

Once sand starts to fall off the first gear, tap and drag to draw a second line from the edge of the first gear's output point to the central part of the second smaller rotating gear.

Sand flows off the first gear, along the new line, and lands on the second gear, initiating its rotation.

Step 3: Direct sand from the second rotating gear over the gap into the target collection area.

As sand falls off the second gear, tap and drag to draw a third line, forming a bridge from the edge of the second gear's output point, extending across the empty space, and into the blue target collection zone.

Sand flows from the second gear, along the final line, and successfully accumulates within the blue collection area.

Step 4: Fill the collection area to the required level.

Wait for the sand to completely fill the collection area.

The progress bar at the top of the screen fills up, and 'Level Complete' appears.

Q: How do I make the gears spin?

A: Draw a path that directs the sand directly onto the central part of the gears. The weight of the sand will cause them to rotate.

Q: My sand isn't reaching the collection area after the second gear, what should I do?

A: Ensure your third path segment is drawn as a continuous bridge from the second gear's output directly into the collection zone, making sure it extends far enough to clear the gap.