Sand Loop Level 276 Solution

Step 1: Start the sand flow.

Tap the sand reservoir at the top left of the screen.

Sand begins to flow out of the reservoir. (01:44)

Step 2: Direct sand through the first pipe.

Rotate the first U-shaped pipe clockwise so its opening connects the initial sand flow to the entrance of the second pipe.

Sand flows smoothly from the start into the second pipe's section. (01:45)

Step 3: Direct sand through the second pipe.

Rotate the second U-shaped pipe clockwise to connect the sand flow from the first pipe to the entrance of the third pipe.

Sand flows smoothly from the second pipe into the third pipe's section. (01:46)

Step 4: Direct sand through the third pipe and onto the platform.

Rotate the third U-shaped pipe clockwise to connect the sand flow from the second pipe to the vertical tube leading to the moving platform. Ensure the moving platform is positioned to catch the sand.

Sand flows through the vertical tube and lands on the moving platform, which carries it towards the final drop. (01:47)

Step 5: Fill the bucket.

Wait for all the sand to fall from the moving platform into the final bucket.

The bucket fills completely, and the 'Level Clear' notification appears. (01:50 - 01:52)

Q: How do I rotate the pipes?

A: In Sand Loop, pipes are typically rotated by tapping and dragging them or by tapping specific rotation controls, depending on the game's interface (not explicitly shown in this video, but inferred).

Q: What do the red blocks do?

A: Red blocks are obstacles. If sand touches them, it is usually lost, and you will not be able to clear the level successfully. You must guide the sand around them.

Q: How do I deal with the moving platform?

A: You need to time your pipe rotations so that the sand flows onto the platform when it is positioned correctly to catch the sand and drop it into the final bucket.