Sand Loop Level 130 Solution

Step 1: Start the level and navigate initial small gaps.

Move forward using the joystick and perform short jumps to clear small gaps in the path.

Character lands safely on subsequent platforms.

Step 2: Cross wider chasms using moving platforms.

Time your jumps to land on horizontally moving platforms, then jump off them to reach the next solid ground.

Character successfully traverses the wide gap via the moving platform.

Step 3: Bypass spinning saw blade obstacles.

Approach the saw blade and perform a well-timed jump to pass over it without making contact.

Character clears the saw blade and lands safely on the platform beyond.

Step 4: Ascend to higher sections using bouncy platforms.

Run onto the bouncy platforms; they will propel the character upwards. Additional jumps can be performed on the pad for extra height.

Character reaches the elevated platform successfully.

Step 5: Collect coins while navigating a series of bouncy platforms and then drop to a lower path.

Utilize multiple bouncy platforms in sequence to collect all visible coins, then move off the edge to drop down to the path below.

All coins are collected, and the character lands safely on the lower path.

Step 6: Cross a very large gap using a jump pad.

Run directly onto the large circular jump pad; it will automatically launch the character across the significant chasm.

Character is propelled across the gap and lands on the platform on the other side.

Step 7: Complete the final section with bouncy platforms and reach the finish line.

Perform a final series of jumps on bouncy platforms to cover the last distance and land on the goal platform.

Character reaches the platform marked with the finish line.

Q: How do I cross the wide gaps in Level 2?

A: Wide gaps are crossed using moving platforms (e.g., at 00:06, 00:10) and a dedicated jump pad (at 00:25). You need to time your jumps carefully for the moving platforms and simply run onto the jump pad.

Q: How do I get past the spinning saw blades?

A: You must jump over the spinning saw blades. Observe their movement and time your jump to clear them when they are in a favorable position (e.g., at 00:13).

Q: What are the bouncy platforms for?

A: Bouncy platforms are used to propel your character upwards to reach higher areas (e.g., at 00:16, 00:18, 00:28) and sometimes to cross gaps indirectly.