Sand Loop Level 123 Solution

Step 1: Lower the first blocking wall

Move right from the start, pick up sand from the pile at 00:01, and drop it onto the pressure plate located in front of the wall at 00:02.

The wall lowers, opening the path forward (00:02).

Step 2: Cross the first water gap

Walk to the next platform, pick up sand from the pile at 00:05, then drop it into the water gap at 00:06 to form a sand bridge. Walk across the bridge (00:07-00:08).

A complete sand bridge appears over the water, allowing safe passage.

Step 3: Lower the initial block on the right path

Move to the next sand pile, pick up sand at 00:09, and drop it onto the pressure plate at 00:10.

The block lowers into the ground, clearing the path.

Step 4: Fill a small platform gap

Walk onto the lowered block, pick up more sand from the adjacent pile at 00:11, and drop it into the small gap on the next platform at 00:13 to create a traversable surface.

The gap is filled with sand, allowing the player to walk over it.

Step 5: Activate the first rising sand platform

Continue to the next sand pile, pick up sand at 00:14, and drop it onto the pressure plate at 00:15. Immediately move onto the rising sand-filled platform (00:16) and jump to the next solid platform (00:17).

The sand-filled platform rises, providing access to higher ground.

Step 6: Lower two consecutive blocking obstacles

Pick up sand from the pile at 00:18. Drop it on the first pressure plate at 00:19 to lower the first block. Move onto the lowered block and drop sand on the second pressure plate at 00:21 to lower the second wall. Proceed through the opened path (00:22).

Both blocking obstacles disappear, opening the path.

Step 7: Lower another blocking wall

Move to the next sand pile, pick up sand at 00:23, and drop it on the pressure plate at 00:24.

The wall lowers.

Step 8: Cross the large water stream

Proceed to the next sand pile, pick up sand at 00:25, and drop it continuously into the long water stream at 00:26 to form a solid sand bridge. Walk across the bridge (00:27).

A long sand bridge is formed, allowing safe passage across the water.

Step 9: Activate the first of two rising platforms for the exit path

Pick up sand from the pile after crossing the water at 00:28 and drop it onto the pressure plate at 00:29.

The first platform rises.

Step 10: Activate the second rising platform for the exit path

Move onto the first risen platform, pick up sand from the pile there at 00:30, and drop it onto the second pressure plate at 00:31. Immediately move onto the second rising platform (00:32).

The second platform rises, bringing the player closer to the exit.

Step 11: Open the exit portal and complete the level

Walk to the final sand pile, pick up sand at 00:33, and drop it onto the last pressure plate at 00:34. Proceed into the newly opened green exit portal (00:35).

The green exit portal opens, and entering it clears the level (00:36).

Q: How do I cross the water gaps in the 'Sand Loop' level?

A: Collect sand from nearby piles and drop it into the water. The sand will form a temporary bridge, allowing you to walk across. Make sure to drop enough sand to create a stable path.

Q: What is the purpose of the pressure plates in this level?

A: Pressure plates are activated by dropping sand onto them. Activating them will typically cause environmental changes like walls lowering, blocks moving, or platforms rising, clearing your path forward.

Q: What should I do if I run out of sand?

A: The level design places sand piles strategically near where they are needed. If you run out, backtrack slightly or look around for the nearest available sand pile to replenish your supply.

Q: How do I make the platforms rise to reach higher areas?

A: To make platforms rise, you need to find the associated pressure plate. Collect sand and drop it onto this plate. For some platforms, you'll need to quickly move onto them immediately after dropping the sand.