Giải pháp Sand Loop Màn 8

Hướng dẫn đầy đủ và chiến lược cho Sand Loop Màn 8. Xem video hướng dẫn và học mẹo chuyên gia để vượt qua màn này.

Video hướng dẫn Màn 8

Hướng dẫn Sand Loop Màn 8
Nhấn để phát video

Xem video hướng dẫn này để học cách vượt qua Sand Loop Màn 8. Làm theo giải pháp từng bước.

Tổng quan Sand Loop Màn 8

Làm chủ Sand Loop Màn 8 với hướng dẫn đầy đủ. Màn người mới này thường mất 1–2 min để hoàn thành. Tìm mẹo, video hướng dẫn và chiến lược cho màn giải đố này.

8
Màn
Người mới
Độ khó
1–2 min
Thời gian TB

Điều hướng nhanh

Chiến lược chi tiết màn chơi

Guide two streams of sand into their respective containers by drawing paths, utilizing a fan to overcome a red barrier, and navigating other obstacles.

Thời gian hoàn thành ước tính
1 min
Số lần thử lại quan sát
0
Thiết bị
unknown
Phiên bản trò chơi
unknown

Thời điểm và hành động quan trọng

TimeCảnhHành độngLỗi phổ biếnĐộ tin cậy
00:00Level StartTwo sand streams begin falling from the top-left and top-middle. Two containers are visible at the bottom-left and bottom-right. A fan is located near the bottom-left container.100%
00:02First Path DrawnThe player draws a long, curved line to guide the top-left sand stream downwards, through a gap in red barriers, towards the fan.100%
00:03Second Path DrawnA short, steep line is drawn below the top-middle sand source, guiding it straight down.100%
00:04Fan Path CreatedA line is drawn from above the fan's output, curving upwards and left, forming a ramp over a red barrier to direct the sand towards the bottom-left container.Sand missing the fan's output or hitting the barrier.90%
00:05Third Path DrawnA final long, curved line is drawn from where the middle sand stream lands, extending horizontally past a red barrier, and then curving downwards into the bottom-right container.Sand hitting the red barrier or missing the container.90%
00:18Level ClearedBoth containers are filled, and the 'SUCCESS' screen appears.100%

Hướng dẫn từng bước

Step 1: Direct the top-left sand stream towards the fan area.

Draw a long, slightly curved line starting from below the top-left sand source. Guide it downwards and slightly right, ensuring it passes through the gap in the red barriers and ends near the fan's input zone.

The top-left sand stream flows along the drawn line and collects near the fan.

Step 2: Direct the top-middle sand stream downwards.

Draw a short, steep line directly below the top-middle sand source, allowing the sand to fall onto the lower platform.

The top-middle sand stream flows along this line and lands on the platform below.

Step 3: Utilize the fan to lift the sand over the red barrier for the bottom-left container.

Draw a line starting from above the fan's outlet, extending upwards and slightly left. Curve this line to create a ramp that goes over the red barrier and directs the sand towards the bottom-left container's opening.

Sand from the fan flows up the drawn line, over the barrier, and starts entering the bottom-left container.

Step 4: Direct the middle sand stream into the bottom-right container.

Draw a long, curved line starting from the point where the middle sand stream lands (from Step 2). Extend it horizontally to the right, past the red barrier, and then curve it downwards into the opening of the bottom-right container.

The middle sand stream flows along this final line and begins filling the bottom-right container.

Lỗi phổ biến và cách sửa

Sand misses the fan or does not get lifted correctly.

Cách sửa: Ensure the first line (Step 1) guides the sand directly into the fan's input, and the fan-assisted line (Step 3) is positioned correctly above the fan's output and clears the red barrier.

Thời gian bằng chứng: Không có

Sand hits a red barrier instead of going around/over it.

Cách sửa: Adjust the angle and length of drawn lines to create clear paths that avoid all red barriers. Make sure lines extend far enough to guide sand completely past obstacles.

Thời gian bằng chứng: Không có

Not enough sand reaches a container, or sand overflows.

Cách sửa: Check that all drawn paths are efficient and direct. For overflowing, ensure sand streams are correctly split or guided to their respective containers without unnecessary diversions.

Thời gian bằng chứng: Không có

Câu hỏi nhanh

Q: How do I make the fan work?

A: You need to draw a path for sand to flow into the fan's intake area. Once the fan is activated by sand, draw another path from the fan's output to guide the blown sand to its destination.

Q: What do the red barriers do?

A: Red barriers are impassable obstacles. Sand cannot flow through them. You must draw lines that go around or over these barriers.

Chia sẻ hướng dẫn Sand Loop Màn 8

Thấy hướng dẫn Sand Loop Màn 8 hữu ích? Chia sẻ với bạn bè đang bị kẹt ở màn này!

FacebookTwitterWhatsAppReddit

Chia sẻ trải nghiệm của bạn

0/200 ký tự

Max 1MB

Max 5MB

Bình luận cộng đồng (0)

Chưa có bình luận. Hãy là người đầu tiên chia sẻ trải nghiệm!