Giải pháp Sand Loop Màn 25

Step 1: Start the level and move into the first sand current.

From the starting platform, move right to enter the horizontal sand current.

Character is pushed by the sand current.

Step 2: Navigate the first set of rotating spike obstacles.

As the sand current pushes, time two precise jumps to clear the two rotating spike obstacles.

Character lands safely on the platform after the second spike trap at 0:07.

Step 3: Traverse the moving platform section.

Jump onto the first moving platform, then jump across to the second moving platform, and finally jump off onto the stable ground near the updraft.

Character lands safely at 0:11.

Step 4: Utilize the first updraft and slide down a slope.

Enter the updraft to gain height, then jump off to land on the sandy slope and slide down.

Character lands in a sand current at the bottom of the slope at 0:14.

Step 5: Cross the gap using the sand current and climb platforms.

Let the sand current push the character, jump onto the next platform, and then jump onto a higher platform.

Character reaches the platform before the second set of spike traps at 0:17.

Step 6: Navigate the second set of sand currents and spike obstacles.

Allow the sand current to push the character, timing two jumps to clear the two rotating spike obstacles.

Character lands safely on the platform after the second spike trap at 0:21.

Step 7: Traverse the narrow sand current path and climb platforms.

Move through the narrow path, allowing the sand current to assist, then jump up to two consecutive higher platforms.

Character reaches the platform at 0:25.

Step 8: Slide down a slope and use the second updraft.

Jump off the current platform onto a sliding slope, let the sand current push, then enter the updraft to ascend.

Character is lifted by the updraft at 0:28.

Step 9: Jump off the updraft, slide, and use a sand current to climb.

Jump off the updraft onto a platform, slide down a slope, and use the subsequent sand current to reach a higher platform.

Character reaches the higher platform at 0:31.

Step 10: Cross the final gap using a moving platform.

Jump across a gap, then jump onto a moving platform, and finally jump off the moving platform to land on the last sand current.

Character lands on the final sand current leading to the goal at 0:34.

Step 11: Reach the level goal.

Allow the final sand current to guide the character directly to the goal platform.

The 'LEVEL CLEAR' message appears on screen at 0:38.

Q: How do I successfully get past the rotating spike obstacles?

A: You must time your jumps precisely as the sand current pushes your character. Wait for the spikes to be in a low position before jumping over them.

Q: What is the best way to utilize the updrafts?

A: Enter the updraft and allow it to lift you to the desired height. Then, jump off in the direction of your next platform or objective.

Q: How do the sand currents affect movement?

A: Horizontal sand currents will push your character in the direction they flow, influencing your jump trajectory. Vertical sand currents (updrafts) will lift your character upwards.