Giải pháp Sand Loop Màn 38

Step 1: Direct the initial sand flow downwards.

Draw a path directly downwards and slightly right from the sand container, past the first two floating blocks.

Sand begins flowing along the drawn path towards the first gate (around 00:01-00:02).

Step 2: Guide sand through the three color-changing gates.

Continue drawing the path downwards, ensuring it passes directly through the center of each of the three gates.

Sand changes color as it passes through each gate (around 00:04-00:07).

Step 3: Lead sand into the circular 'sand loop' mechanism.

Draw a path that curves to the left and slightly upwards, connecting directly to the entrance of the loop. Ensure the path is deep enough for all sand to enter.

Sand fills the entrance of the loop and starts moving around the circle (around 00:08).

Step 4: Guide sand out of the sand loop and into the truck.

Once sand is circulating or approaching the loop's exit, draw a clear path downwards from the loop's exit point, leading directly to the truck.

Sand exits the loop and flows uninterrupted into the truck (around 00:11-00:12).

Step 5: Collect all required sand.

Wait for all the sand to fall into the truck.

The 'LEVEL COMPLETE' screen appears (around 00:15).

Q: How do I make the sand change color?

A: To change the sand's color, you must guide it through the floating color-changing gates. Each gate will transform the sand to a specific color.

Q: What is the best way to get the sand through the spinning loop mechanism?

A: Draw a clear, deep path into the entrance of the loop, ensuring all sand can enter without spilling. Once inside, guide it out with another clear path directly to the truck. Avoid drawing paths too early that might block the sand's movement within the loop.

Q: My sand is spilling out of the path, what should I do?

A: To prevent spills, draw narrower and deeper channels for the sand. You can also quickly draw small barriers or 'walls' to contain errant sand balls before they fall off the level.