Giải pháp Sand Loop Màn 338

Step 1: Fill the first small container with yellow sand to activate the red sand source.

Draw a path from the initial sand source at the top left to the small container on the left side of the screen.

Yellow sand flows into and fills the container, and a red sand source becomes active.

Step 2: Activate the red switch to open the main gate on the right.

Draw a clear, direct path from the newly activated red sand source to the red pressure switch located just before the gate.

Red sand presses the switch, and the gate swings open.

Step 3: Guide all remaining sand towards the final large bucket, activating the blue switch on the way.

Draw a continuous path from the main sand flow (which may mix with residual red sand) downwards, past the blue switch, and directly into the large bucket at the bottom of the screen.

All sand flows into the final bucket, and 'LEVEL COMPLETE' is displayed.

Q: How do I open the first gate on the right?

A: You need to guide the red sand to the red pressure switch located just before the gate. This is achieved by first filling the small container with yellow sand to activate the red sand source, then drawing a path for the red sand.

Q: What is the purpose of the blue switch?

A: The blue switch is activated by any sand flowing over it. It appears to be a requirement for level completion, as the player guides sand over it, although it does not open a new gate like the red switch.