Giải pháp Sand Loop Màn 179

Step 1: Position the initial sand chute to direct sand to the left path.

Adjust the first lever (bottom left) to point the chute completely left.

The chute's opening faces left, ready for sand flow (as seen at 00:42).

Step 2: Release sand and initiate flow to the left collection point.

Tap the screen to release the sand from the main funnel.

Sand begins to flow into the system and towards the first (left) rotating platform (as seen at 00:42).

Step 3: Divert the subsequent sand flow to the right collection point.

Immediately after releasing sand, switch focus to the second lever (top right) and rotate the platform counter-clockwise to catch and redirect the sand (as seen at 00:43-00:46).

The platform aligns to guide sand coming from the top-left pathway into the right collection point, filling it successfully (as seen at 00:48).

Q: How do I fill both collection points simultaneously?

A: You need to quickly adjust the second rotating platform after releasing the sand. The initial flow will go to the left, and a subsequent flow, diverted by the platform, will go to the right.

Q: What's the correct angle for the initial sand release?

A: The first lever should be adjusted to direct the sand completely to the left, allowing it to flow into the first rotating section.

Q: When should I adjust the second lever?

A: Immediately after releasing the sand from the main chute. The timing is crucial to catch the sand that would otherwise miss the right collection point.