Sand Loop 레벨 272 솔루션

Step 1: Rotate the L-shaped block directly to the right of the sand dispenser exit to direct sand right and down.

Tap the L-shaped block (located at approximate grid position 4th column, 2nd row from top) three times to rotate it to the 'right and down' orientation. (Initial state: right-down, 1st tap: left-down, 2nd tap: right-up, 3rd tap: right-down).

The block's opening faces right and down.

Step 2: Rotate the L-shaped block below the previous one to direct sand left and up.

Tap the L-shaped block (located at approximate grid position 4th column, 3rd row from top) once to rotate it to the 'left and up' orientation. (Initial state: right-up, 1st tap: left-up).

The block's opening faces left and up.

Step 3: Rotate the L-shaped block at the bottom right, near the goal, to direct sand right and down.

Tap the L-shaped block (located at approximate grid position 7th column, 7th row from top) twice to rotate it to the 'right and down' orientation. (Initial state: down-left, 1st tap: right-up, 2nd tap: right-down).

The block's opening faces right and down.

Step 4: Rotate the U-shaped block at the top right to direct sand downwards.

Tap the U-shaped block (located at approximate grid position 7th column, 1st row from top) once to rotate it to the 'downwards' orientation. (Initial state: upwards, 1st tap: downwards).

The block's opening faces downwards.

Step 5: Rotate the U-shaped block at the top left to direct sand downwards.

Tap the U-shaped block (located at approximate grid position 1st column, 1st row from top) once to rotate it to the 'downwards' orientation. (Initial state: upwards, 1st tap: downwards).

The block's opening faces downwards.

Step 6: Place a rectangular block in the gap below the top-right U-shaped block.

Tap the empty space at approximate grid position 7th column, 2nd row from top. A rectangular block will appear.

A rectangular block fills the gap, creating a continuous path segment.

Step 7: Place a rectangular block in the gap next to the goal, below the L-shaped block rotated in step 3.

Tap the empty space at approximate grid position 7th column, 8th row from top. A rectangular block will appear.

A rectangular block fills the gap, guiding sand into the goal.

Step 8: Rotate the U-shaped block at the bottom left to direct sand upwards.

Tap the U-shaped block (located at approximate grid position 2nd column, 7th row from top) once to rotate it to the 'upwards' orientation. (Initial state: downwards, 1st tap: upwards).

The block's opening faces upwards.

Step 9: Rotate the U-shaped block near the bottom center (above the goal) to direct sand upwards.

Tap the U-shaped block (located at approximate grid position 5th column, 7th row from top) once to rotate it to the 'upwards' orientation. (Initial state: downwards, 1st tap: upwards).

The block's opening faces upwards.

Step 10: Start the sand flow simulation.

Tap the triangular 'play' button icon at the bottom of the screen.

Sand starts pouring from the dispenser and flows through the constructed path.

Q: How do I rotate the blocks?

A: Tap on a block to rotate it clockwise. Some blocks require multiple taps to reach the desired orientation, as seen in steps 1 and 3.

Q: How do I place the rectangular blocks?

A: Tap on an empty square where a rectangular block is needed, and it will automatically be placed into the gap.

Q: What is the overall goal of the level?

A: The objective is to manipulate the environment (blocks) to create a continuous and unbroken path for the sand to flow from the dispenser at the top-left to the collector at the bottom-right.