Sand Loop 레벨 259 솔루션

Step 1: Create a sand bridge to the first fan.

Tap and hold the sand source to make sand fall, forming a pile on and around the first fan.

A sufficient amount of sand has collected to form a path for the puff.

Step 2: Blow the sand to create a path for the puff towards the loop.

Activate the first fan (tap it) to blow the sand rightwards, creating a slope/bridge.

Sand is visibly blown to the right, forming a continuous path towards the loop entrance.

Step 3: Guide the puff into the rotating loop structure.

Allow the puff to walk onto the newly formed sand bridge and enter the loop on its own.

The puff is inside the transparent rotating loop.

Step 4: Rotate the loop to safely guide the puff to the sand mound below.

Tap and hold the loop to rotate it clockwise. Release when its opening is directly above and aligned with the sand mound.

The puff falls out of the loop and lands safely on the sand mound, then walks down to the ground.

Step 5: Guide the puff to the second fan.

The puff will automatically walk from the sand mound down to the flat ground where the second fan is located.

The puff is positioned near the second fan, ready to be blown.

Step 6: Blow the puff into the goal area.

Activate the second fan (tap it) to blow the puff leftwards into the large white goal area.

The puff is propelled into the goal area, and the 'Level Clear' screen appears.

Q: How do I get the puff out of the loop safely without it falling off the map?

A: You need to tap and hold the loop to rotate it clockwise. Release when the loop's opening is directly aligned with the sand mound beneath it. This allows the puff to fall onto the mound and continue its path.

Q: What is the correct timing for the first fan?

A: Activate the first fan once a sufficient amount of sand has collected on it. You want to create a continuous sand bridge that allows the puff to walk smoothly from the starting area into the loop.