Sand Loop 레벨 285 솔루션

Step 1: Create a sand block to interact with.

Tap the blue switch on the left side of the screen to activate the sand dispenser, filling the initial gap.

Sand flows down and solidifies into a movable block in the designated area (around 00:03).

Step 2: Move the sand block onto the first conveyor belt.

Tap the sand block to push it to the right until it reaches and starts moving on the upward-sloping segment of the first conveyor belt.

The sand block is clearly moving rightward, carried by the conveyor (around 00:06).

Step 3: Guide the sand block through the multi-tiered conveyor loop.

Continue tapping the sand block as needed to ensure it progresses along the first conveyor, drops to the lower-left moving conveyor, then drops again to the final rightward moving conveyor.

The sand block smoothly transitions between the different conveyor sections (around 00:07 - 00:09).

Step 4: Deliver the sand block to the final exit point.

Allow the sand block to continue on the last conveyor until it drops into the circular exit hole on the right side of the screen.

The 'Level Complete!' message appears, signifying the successful completion of the level (around 00:11).

Q: How do I make the sand block move?

A: Tap the sand block to push it in the desired direction. For continuous movement on conveyors, you might need to tap it periodically to maintain momentum or correct its path.

Q: What is the primary objective of the 'Sand Loop' level?

A: The main objective is to guide a sand block through a complex path of conveyor belts and drops until it successfully reaches and enters the final exit hole.