Sand Loop 레벨 23 솔루션

Step 1: Clear the initial obstruction and guide sand downwards.

Tap on the yellow block located above the first sand reservoir (00:03) to remove it. Then, draw a diagonal line from the flowing sand's path to the cleared area below (00:06).

Sand flows down the newly created path.

Step 2: Clear the second obstruction and guide sand to the right.

Tap on the second yellow block to the right of the current sand flow (00:09) to remove it. Draw a horizontal line connecting the current sand path to this cleared section (00:11).

Sand moves horizontally into the new path.

Step 3: Create a path through the green fillable section.

Draw a diagonal line downwards through the section of green blocks (00:18). These blocks will fill with sand and solidify into a permanent path.

Sand flows through the green section, which turns brown, indicating a solid path.

Step 4: Redirect sand flow to accelerate downwards.

Draw a short, steep diagonal line downwards immediately after the green section (00:21).

Sand flows quickly down the steep path.

Step 5: Clear the final obstruction to the exit.

Tap on the yellow block located directly above the exit point (00:23) to remove it.

The yellow block disappears, opening the path to the exit.

Step 6: Guide the sand into the exit.

Draw a final diagonal line connecting the current sand flow to the exit pipe (00:26).

Sand enters the exit pipe, and the 'Level Clear' screen appears (00:33).

Q: How do I remove the yellow blocks?

A: Tap on the yellow blocks to clear them and create space for sand paths.

Q: How do green sections work?

A: When sand flows over green sections, they automatically fill up and become a solid, traversable path.

Q: What if my sand isn't flowing to the exit?

A: Ensure your drawn paths create a continuous, downward slope from the inlet to the outlet. Adjust angles or add more path segments as needed.