Step 1: Direct the top-left sand stream towards the fan area.
Draw a long, slightly curved line starting from below the top-left sand source. Guide it downwards and slightly right, ensuring it passes through the gap in the red barriers and ends near the fan's input zone.
The top-left sand stream flows along the drawn line and collects near the fan.
Step 2: Direct the top-middle sand stream downwards.
Draw a short, steep line directly below the top-middle sand source, allowing the sand to fall onto the lower platform.
The top-middle sand stream flows along this line and lands on the platform below.
Step 3: Utilize the fan to lift the sand over the red barrier for the bottom-left container.
Draw a line starting from above the fan's outlet, extending upwards and slightly left. Curve this line to create a ramp that goes over the red barrier and directs the sand towards the bottom-left container's opening.
Sand from the fan flows up the drawn line, over the barrier, and starts entering the bottom-left container.
Step 4: Direct the middle sand stream into the bottom-right container.
Draw a long, curved line starting from the point where the middle sand stream lands (from Step 2). Extend it horizontally to the right, past the red barrier, and then curve it downwards into the opening of the bottom-right container.
The middle sand stream flows along this final line and begins filling the bottom-right container.
경험 공유
커뮤니티 댓글 (0)
아직 댓글이 없습니다. 첫 번째로 경험을 공유해 보세요!