Sand Loop Level 68 Solution

Step 1: Prepare the upper blue path to the blue bucket.

Rotate the top-right L-shaped pipe once clockwise.

The pipe forms a continuous path from the upper blue source towards the blue bucket (00:02).

Step 2: Prepare a partial path for yellow sand in the bottom right.

Rotate the bottom-right straight yellow pipe once clockwise.

The pipe is aligned horizontally (00:03).

Step 3: Prepare the lower blue path to the blue bucket.

Rotate the mid-left L-shaped pipe once clockwise.

The pipe forms a continuous path from the lower blue source towards the blue bucket (00:04).

Step 4: Start the sand flow.

Click the 'PLAY' button at the top.

Both blue and yellow sand start pouring from their respective sources (00:05).

Step 5: Route the first wave of yellow sand downwards.

Immediately rotate the central cross-junction pipe once clockwise.

Yellow sand flows downwards past the junction (00:06).

Step 6: Collect blue sand.

No further player action needed for blue sand; continue monitoring for yellow sand adjustments.

Blue sand pours into the blue bucket (visible around 00:08).

Step 7: Guide the first wave of yellow sand into its bucket.

Rotate the bottom-left L-shaped yellow pipe twice clockwise.

Yellow sand flows into the yellow bucket (visible around 00:10).

Step 8: Redirect remaining yellow sand for the second path.

Rotate the central cross-junction pipe (same as Step 5) once clockwise again.

Remaining yellow sand at the junction is directed upwards (00:13).

Step 9: Open path for upward yellow sand to move left.

Rotate the straight pipe below the yellow source once clockwise.

The pipe is aligned horizontally, guiding sand left (00:14).

Step 10: Prepare an upcoming turn for the yellow sand.

Rotate the L-shaped pipe below the blue source once clockwise.

The pipe points downwards and to the left (00:15).

Step 11: Guide yellow sand through the bottom-middle section.

Rotate the bottom-middle L-shaped pipe twice clockwise.

The pipe forms a turn, directing sand further left (00:17).

Step 12: Create the final yellow path to the bucket.

Rotate the final bottom-left L-shaped pipe once clockwise.

The pipe forms the final turn into the yellow bucket (00:19).

Step 13: Ensure all sand reaches its destination.

Observe the sand flow until complete.

All blue and yellow sand has been collected, and the 'LEVEL CLEARED' message appears (00:24).

Q: How do I rotate the pipes in Sand Loop?

A: Click or tap on the pipe segments to rotate them 90 degrees clockwise with each interaction.

Q: Can I rotate pipes while the sand is flowing in Level 68?

A: Yes, Level 68 requires real-time adjustments. You must rotate pipes while the sand is in motion to guide it through the changing path.

Q: What happens if I run out of time to rotate a pipe?

A: If you don't rotate a pipe in time, the sand will spill out, and you will likely need to restart the level as all sand must be collected.

Q: Do both sand colors flow simultaneously in Level 68?

A: Yes, both yellow and blue sand are released at the same time, and you must manage paths for both concurrently.