Step 1: Initiate sand collection from the start point.
Place two 'Scoop' tools directly beneath the sand dispenser at the top-left, forming a small zig-zag pattern (first scoop catches, second scoop extends to the right).
Sand flows into the first scoop and then into the second after simulation begins.
Step 2: Direct the collected sand downwards.
Place two 'Funnel' tools below the scoops, extending the downward path, guiding sand to the lower-left.
Sand flows through the funnels.
Step 3: Bridge the horizontal gap.
Place two 'Beam' tools horizontally to the right, below the funnels, creating a path for sand to slide across.
Sand slides along the beams.
Step 4: Contain sand at the end of the beams and prepare for collection.
Place two 'Wall' tools at the rightmost end of the beams to prevent sand from falling off. Below these, place two 'Scoop' tools to collect the sand that flows off the beams.
Sand is stopped by walls and collected by the scoops.
Step 5: Move the sand upwards.
Place two 'Fan' tools directly below the two scoops that collected sand from the beams. Ensure they are oriented to blow sand upwards.
The fans blow the sand upwards.
Step 6: Direct sand into the finish point.
Place a final 'Scoop' tool above the fans, positioned to catch the blown sand and drop it into the finish funnel at the bottom-right.
Sand is caught by the final scoop and falls into the finish funnel.
Step 7: Activate the sand flow.
Click the 'Start' button located in the bottom-left corner of the interface.
Sand begins to flow from the dispenser, successfully navigates the entire setup, and fills the finish container, triggering the 'Level Complete' screen.
Share Your Experience
Community Comments (0)
No comments yet. Be the first to share your experience!