Sand Loop Level 385 Solution

Step 1: Prepare the Top-Right L-block to connect sand from the Top-Middle C-block to the Middle-Right L-block.

Tap the Top-Right L-block 2 times. (Initial: Left-Down -> 1st: Up-Left -> 2nd: Up-Right)

The Top-Right L-block rotates to an 'L' shape pointing up-right.

Step 2: Prepare the Top-Middle C-block to direct sand from the Top-Left L-block to the Top-Right L-block.

Tap the Top-Middle C-block 1 time. (Initial: Left-Down, Right-Down -> 1st: Up-Left, Up-Right)

The Top-Middle C-block rotates to a 'C' shape with openings pointing up-left and up-right.

Step 3: Prepare the Middle-Left L-block to connect sand from the Blower to the Middle-Middle C-block.

Tap the Middle-Left L-block 2 times. (Initial: Up-Right -> 1st: Down-Right -> 2nd: Down-Left)

The Middle-Left L-block rotates to an 'L' shape pointing down-left.

Step 4: Prepare the Middle-Right L-block to direct sand from the Top-Right L-block to the Bottom-Middle C-block.

Tap the Middle-Right L-block 1 time. (Initial: Down-Left -> 1st: Up-Left)

The Middle-Right L-block rotates to an 'L' shape pointing up-left.

Step 5: Perform an action on the Bottom-Left L-block (though it does not appear to be part of the final sand path).

Tap the Bottom-Left L-block 2 times. (Initial: Up-Right -> 1st: Down-Right -> 2nd: Down-Left)

The Bottom-Left L-block rotates to an 'L' shape pointing down-left.

Step 6: Prepare the Bottom-Middle C-block to direct sand from the Middle-Right L-block to the Blower.

Tap the Bottom-Middle C-block 1 time. (Initial: Down-Left, Down-Right -> 1st: Up-Left, Up-Right)

The Bottom-Middle C-block rotates to a 'C' shape with openings pointing up-left and up-right.

Step 7: Prepare the Middle-Middle C-block to direct sand from the Middle-Left L-block to the Receiver.

Tap the Middle-Middle C-block 1 time. (Initial: Right-Down, Up-Left -> 1st: Up-Right, Down-Left)

The Middle-Middle C-block rotates to a 'C' shape with openings pointing up-right and down-left.

Step 8: Initiate sand flow and observe the path to the receiver.

Wait for the sand to flow automatically (starts around 00:41).

Sand flows through the configured path, enters the blower, is propelled upwards, and successfully reaches the receiver.

Q: How do I make the sand go upwards in Level 385?

A: The blower located at the bottom-center of the level is responsible for moving sand upwards. Ensure your block configuration directs sand into the blower, and then connects the blower's output to the upward path leading to the receiver.

Q: My sand is getting stuck at the Bottom-Middle C-block, what am I doing wrong?

A: Check the orientation of the Bottom-Middle C-block (tapped at 00:39) and the Middle-Right L-block (tapped at 00:37). These blocks need to form a path that directs sand from the top-right section of the grid down towards the blower. Ensure the C-block directs sand from its entry point to the blower.