Complete walkthrough and strategy guide for Sand Loop Level 373. Watch the video tutorial and learn expert tips to beat this level.
Watch this video walkthrough to learn how to beat Sand Loop Level 373. Follow the step-by-step solution.
Master Sand Loop Level 373 with our complete walkthrough. This expert level typically takes 8–15 min to complete. Find tips, video guides, and strategies for this puzzle level.
A Sand Loop level requiring precise line drawing to guide sand through rotating blocks, activating levers and pressure plates to reach the collection basket.
| Time | Scene | Action | Common Error | Confidence |
|---|---|---|---|---|
| 00:00 | Game start - First attempt | Player begins drawing the first line to guide sand. | 100% | |
| 00:10 | First failure | Sand falls into a pit after interacting with the first rotating block set. | Sand falling into pit. | 100% |
| 00:44 | Start of successful attempt | Player draws the initial line for the successful run. | 100% | |
| 00:46 | First lever activation | Sand hits the first lever, retracting a barrier. | 100% | |
| 00:48 | Second lever and platform activation | Sand hits the second lever, extending a moving platform and flowing onto a pressure plate. | 100% | |
| 00:50 | Pressure plate activation and final gate opening | Sand fully covers the pressure plate, opening the final gate to the basket. | 100% | |
| 00:54 | Level clear | Sand completely fills the basket, and the 'Clear!' screen appears. | 100% |
Draw a diagonal line from the sand source (top-left) to just above the first lever, ensuring it clears the rotating blocks.
Sand flows down, avoiding the rotating blocks, and hits the lever, causing the horizontal barrier to retract (00:46).
Draw a slightly curved line from the landing point after the first lever, directing sand towards the second lever and the moving platform area.
Sand hits the second lever, causing a moving platform to extend and sand to flow onto a pressure plate (00:48-00:50). The pressure plate is activated.
Draw a horizontal line from the pressure plate's exit point to the basket, potentially extending slightly into the basket to ensure full collection.
The final gate opens, and the sand flows into the basket, filling it to clear the level (00:52-00:54).
Sand falls into the pit below the initial rotating blocks or misses the first lever.
Fix: Adjust the initial line's angle and length. It needs to be steep enough to clear the blocks but angled correctly to direct sand onto the first lever's platform without overshooting or falling short. Experiment with starting the line higher or ending it further out.
Evidence Time: 00:10
Sand misses the second lever or fails to activate the pressure plate fully.
Fix: Ensure the line drawn after the first lever is angled correctly to guide sand directly onto the second lever, then allows it to pool on the pressure plate without spilling.
Evidence Time: N/A
Q: How do I get past the first set of rotating blocks without losing sand?
A: Draw a diagonal line from the sand source that's high enough to clear the rotating blocks, but still angled to guide the sand towards the first lever below them. The successful run in the video draws a line around 00:44 that works.
Q: My sand isn't activating the second lever or pressure plate properly. What should I do?
A: Ensure your line directs the sand squarely onto the second lever to activate the platform. Then, make sure the line allows the sand to collect on the pressure plate rather than flowing off too quickly. A slightly curved or horizontal line can help pool the sand.
View Guide →
View Guide →
View Guide →
View Guide →
View Guide →
View Guide →
View Guide →
View Guide →
View Guide →
View Guide →
View Guide →
View Guide →
Share Your Experience
Community Comments (0)
No comments yet. Be the first to share your experience!