Sand Loop Level 18 Solution

Step 1: Activate initial triangular platforms for character path.

Tap and drag sand from the top-left source to sequentially fill three triangular basins on the left side.

Each triangular platform turns green as its basin fills.

Step 2: Lower vertical platforms to create path to the next sand source.

Redirect the sand flow to the right, filling the large basin below the two vertical platforms.

The two vertical platforms lower into position.

Step 3: Rotate vertical platforms to form a continuous path.

Tap the left vertical platform, then the right vertical platform, to rotate them into alignment.

The platforms rotate and connect, allowing the character to move across.

Step 4: Raise a bridge to a new island.

From the new sand source, drag sand to the left to fill a basin, raising a bridge.

A bridge connects the character's current position to the island on the left.

Step 5: Activate two circular platforms and route sand through a pipe.

From the new sand source, drag sand to the right to fill the two circular platforms, then continue the stream into the pipe entrance.

Both circular platforms turn green, and sand flows continuously through the pipe system.

Step 6: Lower a large platform (gate) and activate a lever.

Ensure the sand flowing from the pipe fills the large basin on the right, then extend the sand flow to activate the lever mechanism further right.

The large platform lowers, and the lever moves to an 'on' position.

Step 7: Lower the character's platform and collect a key.

From the sand source on the rightmost island, drag sand downwards to fill the small basin directly below the character.

The platform under the character lowers, revealing a key which the character automatically collects.

Step 8: Activate a second lowering platform.

Direct sand into the pipe next to the character, then guide the exiting sand into the circular basin at the bottom right.

The circular basin fills, and another platform lowers.

Step 9: Activate a moving platform to cross a gap.

Drag sand to the bottom-right, filling the long, narrow trough connected to a platform.

The trough fills, and the platform begins to move horizontally, carrying the character across the gap.

Step 10: Lower a final bridge to the exit area.

From the new sand source on the far right, drag sand to the left to fill a basin.

A bridge lowers, connecting the character's platform to the final exit area.

Step 11: Open the final exit gate.

Drag sand to the right, filling the long trough leading to the final gate.

The trough fills, and the final gate opens.

Step 12: Trigger level completion.

Guide the character through the open gate and then direct sand into the small basin on the far right.

The basin fills, and the 'NEXT LEVEL' button appears, indicating completion.

Q: How do I control the sand flow?

A: Tap and drag your finger on the screen to guide the sand from its source to fill basins or activate mechanisms.

Q: How does the character move?

A: The character moves automatically along clear paths and across activated platforms/bridges. Your goal is to create these paths using sand.

Q: What do the green platforms mean?

A: Platforms that turn green indicate they have been successfully activated by sufficient sand flow.