Sand Loop Level 107 Solution

Step 1: Collect the first star and activate the first weight-sensitive platform.

Draw a path from the initial sand pile to guide the sand ball onto the descending platform, then further down to collect the first star.

The platform descends at 00:05, and the first star is collected at 00:10.

Step 2: Utilize the first fan to cross a gap and activate the second weight-sensitive platform to collect the second star.

Draw a path that positions the sand ball to be pushed by the fan across the gap, landing on the second platform, and then guiding it to collect the second star.

The sand ball is pushed by the fan at 00:13, lands on the second platform at 00:17, and collects the second star at 00:23.

Step 3: Navigate past a water stream and rotating gears to collect the third star.

Draw a path that swiftly diverts the sand ball away from the water stream and then guides it through the precise openings of the rotating gears.

The sand ball successfully avoids the water at 00:25, passes the gears at 00:27, and collects the third star at 00:32.

Step 4: Descend to a lower section and use another fan to reach a platform.

Draw a path that allows the sand ball to slide down a long incline and then direct it into the airflow of a fan, propelling it onto a higher platform.

The sand ball slides down the incline at 00:35 and is blown by a fan onto a platform at 00:39.

Step 5: Drop to the lowest section, use a fan to cross a large gap, and collect the fourth star while avoiding spikes.

Allow the sand ball to fall to the lowest level at 00:43, then draw a path to utilize a fan to cross a wide gap at 00:46. Subsequently, draw a path that carefully steers the sand ball past a section with spikes to collect the fourth star.

The sand ball crosses the gap with the fan at 00:46, avoids the spikes at 00:49, and collects the fourth star at 00:52.

Step 6: Guide the sand ball into the final exit chute.

Draw a long, continuous path from the fourth star's location, directing the sand ball towards and into the level's exit chute.

The sand ball enters the exit chute at 01:00, leading to the 'LEVEL CLEARED' screen at 01:10.

Q: How do I get past the rotating gears without losing sand?

A: You need to observe the rotation pattern and draw your path strategically, timing it so the sand ball passes through the openings when they align with your intended route. A continuous, steady flow is key.

Q: What's the best way to utilize the fans to cross gaps?

A: Draw a path that funnels the sand ball directly into the center of the fan's airflow. Ensure your path leads to a solid landing area on the other side. You may need to create a slightly angled path to give the fan maximum effect.

Q: How do I avoid the water stream at the beginning of the second section?

A: Draw a sharp, upward or downward curving path immediately before the water stream to quickly divert the sand ball's trajectory away from the water's path. Speed in drawing and execution is important here.