Giải pháp Sand Loop Màn 389

Step 1: Guide the initial stream of sand to trigger the second source and direct it towards the bucket's opening.

Draw a long, curved line starting from the left wall, moving diagonally downwards to the right, then curving left to create a channel that directs the sand past the second sand source's trigger and then towards the bucket entrance.

The first sand stream flows along your line, releases the second sand source, and begins entering the bucket.

Step 2: Direct the second stream of sand, once released, into the bucket without disrupting the first stream's flow.

Once the first sand stream has passed the release point of the second sand source, quickly draw a short, straight line just above the bucket to act as a barrier, preventing the second stream from flowing upwards and guiding it directly into the bucket.

Both sand streams are successfully contained and flow into the bucket, clearing the level.

Q: How do I get all the sand into the bucket?

A: You need to manage two sand streams. The first line guides the initial sand to release the second source. A second, carefully timed line is then used to guide the second stream into the bucket as well.

Q: Why does my sand miss the bucket or get stuck?

A: The precision of your lines is key. Ensure your first line is curved enough to direct sand into the bucket and your second line creates an effective barrier without blocking the primary flow.

Q: Do I need to draw multiple lines for this level?

A: Yes, the optimal solution shown in the video uses two distinct lines. One long, curved line for the initial stream, and a second short line to direct the sand from the second source.