Giải pháp Sand Loop Màn 386

Step 1: Place the first L-shaped pipe to redirect sand from the source.

Drag the L-shaped pipe from the bottom-left storage slot and place it directly below the sand source, then rotate it to guide sand horizontally towards the left funnel's general area.

The first pipe is positioned and oriented to connect the sand source to the leftward path.

Step 2: Place the second L-shaped pipe to create a distribution path.

Drag the second L-shaped pipe from the bottom-right storage slot and position it below the outlet of the first funnel, anticipating sand flow from the first pipe.

The second pipe is placed to receive sand from the first funnel's output.

Step 3: Rotate the second pipe to ensure all funnels are filled.

Tap the second pipe to rotate it until it forms a continuous path that allows the sand to flow into the middle and right target funnels after filling the first.

Both pipes are configured to create an uninterrupted path from the sand source to all three funnels.

Step 4: Initiate sand flow and complete the level.

Tap the play button located in the top-right corner of the screen to start the sand flow.

All three funnels successfully fill with sand, and the 'Level Complete!' message appears on screen.

Q: How do I move the pipe segments?

A: You can drag pipe segments from their storage slots at the bottom of the screen onto the main playfield.

Q: How do I rotate a pipe after placing it?

A: Simply tap on a pipe segment once it's placed on the playfield to rotate it clockwise.

Q: What is the objective of Level 386?

A: The objective is to guide all the sand from the source into the three target funnels by using the available pipe segments.