Giải pháp Sand Loop Màn 149

Step 1: Initiate sand flow

Tap the red barrier at the top left of the screen to release the sand.

Sand starts pouring out from the top opening.

Step 2: Guide sand past the first rotating gear

As the sand approaches the first red gear, tap and drag the gear clockwise to rotate its opening towards the incoming sand, creating a path.

Sand flows smoothly through the first gear.

Step 3: Guide sand past the second rotating gear

Immediately after clearing the first gear, rotate the second red gear clockwise to align its opening for the sand to pass.

Sand flows smoothly through the second gear.

Step 4: Guide sand past the third rotating gear

Continue the process by rotating the third red gear clockwise to create a path for the flowing sand.

Sand flows smoothly through the third gear.

Step 5: Guide sand past the fourth rotating gear and into the funnel

Finally, rotate the fourth red gear clockwise to direct the sand into the large funnel below.

Sand flows into the funnel and then into the final collection container.

Step 6: Fill the collection container

Allow all the sand to flow from the funnel into the container until it's full.

The 'LEVEL CLEAR' message appears on screen.

Q: How do I rotate the gears?

A: Tap and drag on the red gears to rotate them and change the direction of their openings.

Q: Do I need to rotate all gears at once?

A: No, you need to rotate them sequentially as the sand flows through the level, one by one, to create a continuous path.