Sand Loop 레벨 72의 완전한 공략 및 전략 가이드. 동영상 튜토리얼을 보고 이 레벨을 클리어하기 위한 전문 팁을 배우세요.
이 동영상 공략을 보고 Sand Loop 레벨 72을 클리어하는 방법을 배우세요.
완전한 공략으로 Sand Loop 레벨 72을 마스터하세요. 이 쉬움 레벨은 일반적으로 2–3 min이 걸립니다.
Guide sand over a rotating gear mechanism and through a funnel to reach the goal container by drawing strategic lines.
| Time | 상황 | 동작 | 자주 하는 실수 | 신뢰도 |
|---|---|---|---|---|
| 00:00 | Level Start | Initial level layout displayed, sand begins to flow. | 100% | |
| 00:01 | Drawing first line | Player draws a diagonal line to guide sand onto the rotating gear. | 100% | |
| 00:04 | Sand on gear | Sand successfully lands on the rotating gear and begins to accumulate. | 100% | |
| 00:05 | Drawing second line | Player draws a short horizontal line on the right side of the gear to prevent sand spillage. | 100% | |
| 00:07 | Drawing third line | Player draws a diagonal line from the top of the gear into the funnel opening. | 100% | |
| 00:09 | Sand entering funnel | Sand slides off the gear, down the third line, and successfully enters the funnel. | 100% | |
| 00:10 | Sand filling goal | Sand enters and starts filling the goal container at the bottom. | 100% | |
| 00:11 | Level Clear | The 'SUCCESS' message appears, indicating the level has been cleared. | 100% |
Draw a diagonal line from the sand source exit down to the left-front edge of the rotating gear. Ensure the line is long enough to catch all sand.
Sand flows smoothly along the drawn line and begins collecting on the rotating gear (visible at 00:04).
As sand accumulates on the gear and begins to rotate upwards, draw a short horizontal line on the right side of the gear, slightly above its surface, to create a wall. This line acts as a barrier, allowing the gear to carry the sand up.
The sand is lifted by the gear's rotation, with the drawn line preventing it from spilling (visible at 00:06).
Draw a diagonal line from the upper-right edge of the rotating gear (where the sand is being carried) down into the opening of the funnel. Ensure this line provides a clear path and is angled correctly.
Sand slides off the rotating gear, down the third drawn line, and successfully enters the funnel, then the final goal container (visible at 00:09).
Sand misses the rotating gear or falls off too early after the first line.
해결법: Adjust the angle and length of the first drawn line (00:01) to ensure the sand stream lands accurately on the gear. Make sure the second line (00:05) is drawn precisely to act as an effective barrier.
근거 시간: 없음
Sand gets stuck on the rotating gear or spills over the top/back.
해결법: The second line (00:05) must be drawn at the correct height and position to 'scoop' the sand. If too low, sand spills; if too high or far, it might not guide effectively. Observe the sand's movement closely and adjust the line's placement.
근거 시간: 없음
Sand misses the funnel opening after being guided off the gear.
해결법: Ensure the third drawn line (00:07) is accurately placed, starting from where the sand exits the gear and extending directly into the funnel opening, creating an unobstructed path.
근거 시간: 없음
Not enough sand reaches the goal container to clear the level.
해결법: Review all drawn lines for efficiency. Minimize gaps or incorrect angles where sand could escape. Each line should contribute to a continuous and contained flow.
근거 시간: 없음
Q: How many lines are needed to complete this level?
A: This solution uses three distinct lines to guide the sand from start to finish.
Q: What is the purpose of the second line drawn on the rotating gear?
A: The second line acts as a wall or barrier to prevent sand from falling off the right side of the rotating gear, allowing the gear's rotation to carry the sand upwards.
Q: How can I make sure the sand enters the funnel accurately?
A: Draw the third line precisely from the sand's exit point on the rotating gear directly into the funnel's opening, ensuring a clear and direct path.
가이드 보기 →
가이드 보기 →
가이드 보기 →
가이드 보기 →
가이드 보기 →
가이드 보기 →
가이드 보기 →
가이드 보기 →
가이드 보기 →
가이드 보기 →
가이드 보기 →
가이드 보기 →
경험 공유
커뮤니티 댓글 (0)
아직 댓글이 없습니다. 첫 번째로 경험을 공유해 보세요!