Sand Loop 레벨 70 솔루션

Step 1: Begin constructing the path from the sand dispenser on the right side.

Tap and rotate the pipe segment located directly below and to the right of the sand dispenser until it connects and points downwards/right.

The segment visually connects to the dispenser and aligns with the next pipe piece.

Step 2: Continue the path on the right side.

Tap and rotate the pipe segment located to the right of the previous segment until it connects the path.

The segment visually forms a continuous pipe section.

Step 3: Guide the path upwards on the right side.

Tap and rotate the pipe segment located above the previous segment until it connects and points upwards.

The segment visually forms a continuous pipe section pointing upwards.

Step 4: Prepare the entry point for the left side of the fan area.

Tap and rotate the pipe segment at the top-middle-left section of the puzzle until it connects to the path and points towards the fan area.

The segment visually connects the path and directs flow towards the fan.

Step 5: Begin constructing the path from the sand dispenser on the left side.

Tap and rotate the pipe segment located directly below and to the left of the sand dispenser until it connects and points downwards/left.

The segment visually connects to the dispenser and aligns with the next pipe piece.

Step 6: Guide the sand into the fan's airstream.

Tap and rotate the pipe segment located directly below the fan until it connects the path and positions the sand to be blown by the fan.

The segment visually connects and directs sand into the fan's blowing path.

Step 7: Create a receiving segment for the sand blown by the fan.

Tap and rotate the pipe segment at the bottom-middle-left section of the puzzle until it connects to receive sand from the fan's output area.

The segment visually aligns to catch sand from the fan and extend the path.

Step 8: Continue the path towards the target cup.

Tap and rotate the pipe segment at the top-left area until it connects the path.

The segment visually forms a continuous pipe section.

Step 9: Further extend the path towards the target cup.

Tap and rotate the pipe segment at the middle-left area until it connects the path.

The segment visually forms a continuous pipe section.

Step 10: Create the final connection directly into the target cup.

Tap and rotate the pipe segment located directly above the target cup until it connects to the cup's opening.

The segment visually connects to the target cup, forming a complete path.

Step 11: Initiate the sand flow.

Tap the green 'Play' button (triangle icon) at the bottom of the screen.

Sand begins to dispense from the sand dispenser.

Step 12: Successfully collect all sand in the target cup.

Observe the sand flow through the constructed path, noting its interaction with the fan.

All sand enters the target cup, and the 'Level Complete' screen appears.

Q: How do I use the fan in Level 70?

A: The fan in Level 70 automatically blows sand across a gap. You need to position a pipe segment to feed sand into its airstream from one side and another pipe segment on the opposite side to catch the blown sand.

Q: What is the correct pipe configuration for Level 70?

A: The solution involves creating a path from the dispenser to the fan on both its left and right sides, and then connecting the fan's output to the target cup. Carefully rotate each pipe segment to ensure a continuous flow, including setting up the entry and exit points for the fan.