Sand Loop 레벨 67 솔루션

Step 1: Move the first blue block onto its pressure switch.

Create a sand ramp to guide the blue block from its initial position onto the pressure switch. The sand should fill the gap in front of the block.

The block slides onto the switch, which then illuminates green and/or lowers, opening a gate.

Step 2: Move the second blue block onto its pressure switch.

Clear the sand directly underneath the second blue block to cause it to drop. Then, create a sand path to guide it left onto its respective pressure switch.

The block lands on the switch, activating it and opening another gate.

Step 3: Reach the platform above the current position.

Walk to the right edge of the current platform and create a pile of sand underneath the character to lift it to a higher position. Jump from the sand pile to the platform on the right.

Character successfully lands on the higher platform to the right.

Step 4: Move the third blue block onto its pressure switch.

Clear the sand from directly under the third blue block to drop it. Then, create a sand ramp to push it to the left onto its pressure switch.

The block lands on the switch, activating it.

Step 5: Activate the next pressure switch and cross the gap with falling spikes.

Stand on the pressure switch to activate it. Immediately move to the right, creating a sand lift to propel the character across the gap. Time the movement to avoid the falling spikes.

Character successfully lands on the platform on the other side of the spikes.

Step 6: Move the fourth blue block onto its pressure switch.

Clear sand from underneath the fourth blue block to drop it. Then, create a sand path to guide it left onto its pressure switch.

The block lands on the switch, activating it.

Step 7: Reach the highest platform and activate the final sequence.

Create a sand lift to reach the next highest platform. Walk right and stand on the pressure switch. Then, quickly create a sand bridge to cross the final gap, again navigating past falling spikes.

Character stands on the final pressure switch, and the exit portal becomes visible and active.

Step 8: Enter the exit portal to complete the level.

Move the character into the glowing blue exit portal.

The level completion screen appears.

Q: How do I make the heavy blue blocks move onto their switches?

A: You need to clear sand from directly beneath the blocks to drop them. Then, use your sand manipulation ability to create ramps or pushes that guide the blocks onto their respective pressure switches.

Q: What's the best way to reach high platforms?

A: Position your character on the edge of a lower platform and create a pile of sand directly underneath them. The sand will lift you, allowing you to jump to higher ground or across gaps.

Q: How do I get past the falling spike traps?

A: Watch the timing of the spikes. They typically retract for a short period. Move quickly during this window. You might need to use sand to boost yourself across the gap quickly.