Sand Loop 레벨 428 솔루션

Step 1: Observe the level layout and identify targets and obstacles.

Start the level and note the sand source at the top, two trucks at the bottom (left and right), and the central dividing obstacle.

The level scene is fully displayed.

Step 2: Initiate sand flow and split the path around the central obstacle.

Draw a continuous path from the sand source, splitting it to go around the left side of the central obstacle.

Sand starts flowing along the drawn path, bypassing the obstacle.

Step 3: Direct sand into the left truck.

Extend the path drawn in Step 2 to connect directly into the opening of the left truck.

The left truck begins to fill with sand.

Step 4: Direct the remaining sand into the right truck.

From the initial split point, draw another path that goes around the right side of the central obstacle and connects to the opening of the right truck.

The right truck begins to fill with sand, potentially simultaneously with the left truck.

Step 5: Complete the level.

Allow both trucks to fill completely with sand.

The 'LEVEL CLEAR' message appears on the screen.

Q: How do I split the sand flow to fill multiple trucks?

A: Draw a path that branches off from the main sand flow, directing a portion of the sand to each target truck. Ensure both branches are wide enough and angled correctly for continuous flow.

Q: What's the best strategy for navigating obstacles like the one in this level?

A: Draw smooth, wide curves around obstacles. Avoid drawing paths that are too narrow or have sharp angles, as this can impede sand flow or cause it to get stuck.

Q: How do I know if I'm drawing the path correctly?

A: Observe the sand flow as you draw. If sand is moving continuously towards your intended targets and filling the trucks, your path is effective. If sand gets stuck or misses, you'll need to redraw.