Sand Loop 레벨 442 솔루션

Step 1: Guide sand to the first gate to activate it.

Draw a smooth, curved line from the sand source (top-left) downwards towards the first gate (middle-left).

Sand flows along the drawn path and onto the first gate, causing it to open.

Step 2: Guide sand from the first gate to the second gate to activate it.

Draw another smooth, curved line starting from the output of the first gate (middle-left) across to the second gate (middle-right).

Sand flows along the second path and onto the second gate, causing it to open.

Step 3: Direct all sand from the second gate into the collector.

Draw a broad, curved path from the output of the second gate (middle-right) down and around into the collector (bottom-right), ensuring no sand spills.

All the sand flows into the collector, filling it completely and triggering the 'Level Complete!' screen.

Q: How do I activate the gates in this level?

A: You must draw a path that guides the flowing sand directly onto the gates. The sand's contact will cause them to open.

Q: What should I do if my drawn path is incorrect?

A: While not explicitly shown, in most games of this type, you can erase lines by drawing over them with an eraser tool (if available) or restart the level to try again.

Q: Why isn't the collector filling completely even if sand reaches it?

A: Ensure your final path into the collector is designed to contain all the sand without any escaping. Sometimes, a wider or more enclosed entry point is needed to capture 100% of the sand.