Sand Loop Level 252 Solution

Step 1: Guide the ball past the initial red block obstacles.

From the ball's drop point, draw a sand path that curves right to avoid the upper red block, then quickly down-left to channel the ball between the two lower red blocks.

Ball navigates the red blocks and falls towards the conveyor belt.

Step 2: Direct the ball from the conveyor belt into the lower section.

As the ball approaches the end of the conveyor belt, draw a short, steep sand path directly underneath its exit point to guide it off the belt and into the open space below, avoiding any static or moving obstacles.

Ball successfully leaves the conveyor belt and drops into the area containing the moving piston.

Step 3: Navigate the moving piston and guide the ball into the final target hole.

Draw a sand path in the lower section that channels the ball away from the piston's crushing path and directly into the green target hole. This requires timing the path creation to ensure the ball has a clear passage past the piston when it moves.

Ball passes the moving piston and enters the green target hole, resulting in 'LEVEL CLEAR!'.

Q: How do I get the ball past the moving piston effectively?

A: You need to observe the piston's movement pattern. Draw a sand path that provides a clear route to the hole when the piston is retracted or moving away, ensuring the ball isn't trapped or crushed. Precision in drawing the path to funnel the ball directly into the hole is key.

Q: What is the best way to get the ball off the conveyor belt?

A: Create a short, downward sloping sand path directly at the end of the conveyor belt. The path should be positioned to catch the ball as it rolls off and direct it into the next section below, ensuring it doesn't get stuck or diverted elsewhere.