Complete walkthrough and strategy guide for Sand Loop Level 193. Watch the video tutorial and learn expert tips to beat this level.
Watch this video walkthrough to learn how to beat Sand Loop Level 193. Follow the step-by-step solution.
Master Sand Loop Level 193 with our complete walkthrough. This advanced level typically takes 5–8 min to complete. Find tips, video guides, and strategies for this puzzle level.
Guide sand through a looping path to sequentially activate two pressure plates and open gates, ensuring both cups are filled.
| Time | Scene | Action | Common Error | Confidence |
|---|---|---|---|---|
| 00:00 | Level Start | The level begins, showing the sand source, two empty cups, and the layout of two pressure plates with their corresponding gates. | 100% | |
| 00:03 | Drawing Initial Path | Player begins drawing the first path segment from the sand source towards the upper-left pressure plate. | 100% | |
| 00:05 | First Gate Activation | Sand flows onto the upper pressure plate, causing the gate directly below it to open. | 100% | |
| 00:07 | Completing Loop Path | Player finishes drawing the complex, looping path that receives sand from the first gate, directs it over the lower pressure plate, and creates a reservoir for sand distribution. | 100% | |
| 00:10 | Second Gate Activation | Sand activates the lower pressure plate on the bottom right, which opens the gate positioned to the left of the bottom cup. | 100% | |
| 00:13 | Sand Filling Cups | Sand from the created loop begins flowing into the upper right cup, while the bottom cup is also filling. | 100% | |
| 00:27 | Level Clear | Both cups are fully filled, and the 'Level Clear' message appears. | 100% |
Draw a straight line from the sand source in the upper-left corner to guide the sand flow directly onto the pressure plate located just below the source.
The gate located directly below the upper pressure plate opens, allowing sand to pass through.
From the exit of the first gate, draw a continuous, looping path. This path should first guide a portion of the sand flow over the lower pressure plate on the bottom right, and simultaneously create a temporary reservoir or holding area from which the remaining sand can later drain into both the bottom and top cups.
The gate to the left of the bottom cup opens, sand starts filling the bottom cup, and sand also begins flowing from the loop into the top cup.
Observe the sand flow through the created paths and wait for sufficient sand to enter and fill both cups to their required levels.
Both cups are filled to the required level, and the 'Level Clear' screen is displayed.
Sand does not activate one of the pressure plates or flows past it too quickly.
Fix: Ensure the drawn path guides a sufficient volume of sand directly onto the pressure plate and allows it to remain there for the required duration to trigger the gate. Adjust the angle or depth of the path leading to the plate.
Evidence Time: N/A
Not enough sand reaches one or both cups to fill them completely.
Fix: The main path, especially the looping structure in step 2, might not be designed efficiently to capture and distribute enough sand. Adjust the depth and volume of the loop to ensure enough sand is retained and directed to both cups.
Evidence Time: N/A
Sand flows past a cup without entering it.
Fix: Ensure the drawn path terminates directly above or into the opening of the cups, creating a clear channel for the sand to fall into the containers without spillage.
Evidence Time: N/A
The exact curvature, width, and depth of the 'loop' path drawn in step 2 might vary between player solutions.
Adaptation: The fundamental goal remains the same: to create a temporary sand reservoir while also directing sand to the second pressure plate. Players can experiment with the loop's specific dimensions to optimize sand distribution and ensure both pressure plates are activated and both cups are filled.
Q: How do I open the first gate at the top left?
A: Draw a path directly from the sand source to the pressure plate situated just below the source to activate it and open the first gate.
Q: What is the purpose of the long curved line or loop drawn in the middle of the level?
A: This looping path serves two main functions: it directs a portion of the sand to activate the second pressure plate on the bottom right, and simultaneously creates a temporary reservoir to ensure enough sand accumulates to fill both the bottom and top cups.
Q: Why isn't my sand filling the second cup (top right)?
A: Your looping path might not be designed to retain enough sand or to direct it towards the second cup effectively. Ensure the loop is deep enough to hold a sufficient volume of sand temporarily and that it has an exit pathway that leads directly into the top right cup after the bottom cup has also started to fill.
View Guide →
View Guide →
View Guide →
View Guide →
View Guide →
View Guide →
View Guide →
View Guide →
View Guide →
View Guide →
View Guide →
View Guide →
Share Your Experience
Community Comments (0)
No comments yet. Be the first to share your experience!