Sand Loop Level 180 Solution

Step 1: Start the ball's descent

Allow the ball to fall naturally from the initial starting platform.

Ball begins to roll downwards.

Step 2: Navigate the initial upper maze section

Draw a straight sand line at 00:03 from the starting platform to direct the ball left, then another line at 00:07 to guide it further left, then a line at 00:09 to turn it right, and finally a line at 00:11 to guide it downwards.

Ball follows the drawn paths, moving through the upper turns of the maze.

Step 3: Clear an obstruction to continue descent

At 00:13, use the eraser tool to remove a small section of sand that is blocking the ball from falling to the next level of the maze.

Ball falls past the previously blocked area.

Step 4: Navigate the mid-maze sections

Draw a series of straight sand lines: at 00:15 to guide the ball left, at 00:17 to direct it down through a narrow gap, at 00:19 to move it right, at 00:22 to move it down, at 00:24 to move it left, at 00:26 to move it down, and at 00:28 to guide it right towards the final obstacle.

Ball successfully traverses the various turns and drops in the middle part of the maze.

Step 5: Overcome the final immovable barrier

At 00:30, select the fan tool and tap/hold to create an upward gust, pushing the ball over the small, immovable block that prevents direct passage to the cup.

Ball is lifted over the barrier and lands on the other side.

Step 6: Guide the ball into the final cup

At 00:33, draw a final straight sand line to direct the ball downwards, and another small line at 00:35 to ensure it lands precisely inside the cup's opening.

Ball successfully enters the cup, and the 'Level Clear' screen appears.

Q: How do I get the ball past the small immovable block near the end of the level?

A: You need to use the fan tool to create an upward draft. Tap and hold the fan tool near the ball to lift it over the small barrier and continue its path towards the cup.

Q: My ball gets stuck partway through the level and won't move, even if I've drawn paths. What should I do?

A: Check if there are any small patches of sand, either from the environment or accidentally drawn, that are blocking the ball's path. Use the eraser tool to carefully remove any obstructions.

Q: What tools are essential for completing this level?

A: You will primarily use the sand drawing tool for creating paths, the eraser tool for clearing blockages, and the fan tool for navigating specific obstacles, particularly the one near the end of the level.