Giải pháp Sand Loop Màn 452

Step 1: Establish the initial sand flow pathway towards the central pipe.

Perform the following sequence of single-unit block drags: * Drag the **Green block** (top-left) one unit to the **right** (00:05). * Drag the **Yellow block** (top-middle) one unit **down** (00:06). * Drag the **Blue block** (top-right) one unit to the **right** (00:06). * Drag the **Purple block** (bottom-left) one unit **up** (00:07). * Drag the **Pink block** (bottom-right) one unit to the **left** (00:08).

Sand begins to flow through the newly created path, guided towards the central pipe.

Step 2: Continue guiding the sand by repositioning blocks to extend the path and maintain flow.

Perform the next sequence of single-unit block drags: * Drag the **Green block** (top-left) one unit **down** (00:09). * Drag the **Yellow block** (top-middle) one unit to the **right** (00:10). * Drag the **Blue block** (top-right) one unit **down** (00:11). * Drag the **Purple block** (bottom-left) one unit to the **right** (00:12). * Drag the **Pink block** (bottom-right) one unit **down** (00:13).

The sand flow progresses further around the level and continues to enter the pipe.

Step 3: Reposition blocks to allow continuous flow around the outer loop and prepare for the next cycle.

Perform the next sequence of single-unit block drags: * Drag the **Green block** (top-left) one unit to the **left** (00:14). * Drag the **Yellow block** (top-middle) one unit **up** (00:15). * Drag the **Blue block** (top-right) one unit to the **left** (00:16). * Drag the **Purple block** (bottom-left) one unit **down** (00:17). * Drag the **Pink block** (bottom-right) one unit to the **right** (00:18).

The blocks return to positions that allow the sand flow to continue its loop without obstruction.

Step 4: Clear all remaining sand by maintaining the continuous flow pattern.

Continue to **repeat the entire sequence of block movements from Step 1 through Step 3 multiple times** until all the sand has successfully entered the central pipe. The video demonstrates this continuous, repetitive pattern.

All sand is collected, and the 'LEVEL CLEARED' screen appears (00:39).

Q: What is the correct order to move the blocks in Sand Loop Level 452?

A: The solution involves a continuous, repeating cycle of moving the five colored blocks (Green, Yellow, Blue, Purple, Pink) one unit at a time in specific directions to create and maintain a flowing path for the sand. Follow the detailed steps provided in the step-by-step guide.

Q: My sand is getting stuck or not all of it is falling into the pipe, what am I doing wrong?

A: This level requires precise timing and direction for each block movement. If sand is getting stuck, it's likely due to an incorrect drag direction or a delay in moving the next block. Ensure you move each block quickly and in the exact sequence shown in the video walkthrough.