Giải pháp Sand Loop Màn 366

Step 1: Release the initial small amount of sand to begin the flow.

Tap the top-left pin to remove it.

Sand starts to flow downwards from the top-left reservoir.

Step 2: Release more sand into the initial channel to build up flow.

Tap the pin directly below the first one (second from the top-left) to remove it.

An increased volume of sand flows past the location of the first two pins.

Step 3: Prepare the main sand path by moving the obstructing block.

Drag the yellow rectangular block upwards to clear the channel below it.

The block is moved, creating a clear vertical path for sand to fall through.

Step 4: Release the majority of the sand into the newly cleared path.

Tap the last remaining pin (at the top-right) to remove it.

All the remaining sand flows rapidly down the path created by moving the block.

Step 5: Ensure all released sand reaches and fills the truck.

No further operations are needed; gravity guides the sand.

The sand successfully fills the truck, triggering the 'LEVEL COMPLETE' screen.

Q: What is the correct order to remove the pins?

A: Remove the top-left pin first, then the pin directly below it. After moving the yellow block, remove the top-right pin.

Q: When should I move the yellow block?

A: Move the yellow block after the first two pins are removed but before the final top-right pin is removed, to ensure a clear path for the main sand volume.