Sand Loop 레벨 355 솔루션

Step 1: Connect the starting pipe to the first U-turn segment.

Rotate the U-turn pipe segment at the top-left to face right, connecting it to the vertical starting pipe.

The U-turn pipe segment aligns and visually connects with the starting pipe.

Step 2: Connect the first U-turn pipe to the adjacent corner piece.

Rotate the corner pipe segment directly below the U-turn so it connects upwards and right.

The corner pipe segment aligns and visually connects with the U-turn pipe.

Step 3: Connect the corner pipe to the vertical straight pipe.

Rotate the vertical straight pipe segment at the bottom-left to connect downwards from the corner pipe.

The vertical straight pipe segment aligns and visually connects.

Step 4: Connect the vertical straight pipe to the next corner piece.

Rotate the corner pipe segment to the right of the vertical straight pipe to connect upwards and right.

The corner pipe segment aligns and visually connects.

Step 5: Connect the corner pipe to the next U-turn pipe.

Rotate the U-turn pipe segment below and to the right of the previous corner pipe to connect left and upwards.

The U-turn pipe segment aligns and visually connects.

Step 6: Connect the U-turn pipe to the horizontal straight pipe.

Rotate the horizontal straight pipe segment to the right of the U-turn pipe to connect to it.

The horizontal straight pipe segment aligns and visually connects.

Step 7: Connect the horizontal straight pipe to the T-junction pipe.

Rotate the T-junction pipe segment above the horizontal straight pipe to connect downwards and also to the right.

The T-junction pipe segment aligns and visually connects.

Step 8: Connect the T-junction pipe to the final T-junction pipe leading to the target.

Rotate the T-junction pipe segment near the top-right to connect leftwards to the previous T-junction and downwards to the target.

All pipe segments form a continuous, visually connected path from the sand source to the target.

Step 9: Start the sand flow.

Click the 'START' button.

Sand begins to flow through the constructed pipe system.

Q: How do I rotate the pipe segments in Sand Loop?

A: Tap or click on a pipe segment to rotate it clockwise until it aligns with other pipes to form a path.

Q: What happens if the sand doesn't flow correctly after I press start?

A: If the sand doesn't flow correctly, it means there's a break in the pipe connection. Re-check each segment to ensure they form a continuous path from the start to the target.