Sand Loop 레벨 215 솔루션

Step 1: Guide the initial sand flow from the source to the first rotating platform.

Use the eraser tool to carve a curved path downwards from the sand source (top-left) to the top-left rotating platform.

Sand begins to flow onto the first rotating platform.

Step 2: Direct sand from the first platform towards the fan and down to the lower level.

Rotate the first platform counter-clockwise to point towards the fan. Place a block immediately to the right of the fan to create a wall. Carve a path behind the fan, leading downwards and slightly right, allowing the fan to push the sand.

Sand is pushed by the fan and starts falling into the lower level.

Step 3: Collect sand on the lower level and guide it to the second rotating platform.

Place a block on the ground level below where the sand is falling to help contain and guide it. Use the eraser tool to carve a smooth channel on the lower level, leading towards the bottom-right rotating platform.

Sand flows onto the second rotating platform.

Step 4: Direct sand from the second platform into the truck.

Rotate the second platform clockwise to point its outlet directly into the waiting truck.

Sand begins to fill the truck, and the 'Level Complete!' message appears.

Q: How do I get the sand past the fan?

A: You need to carve a path behind the fan so that when the sand falls, the fan can push it horizontally towards the next section. A block can be used to create a wall to ensure the sand is pushed correctly.

Q: How do I rotate the platforms?

A: Tap or click on the rotating platforms to change their direction. You'll need to adjust them to point the sand flow in the desired direction.